Teledyne DNV-33D instruction manual Installation Quick Start, 1Panel Mounting

Page 8

2.0INSTALLATION

QUICK START

Install DV-33D gauge tube in vacuum system (see section 2.4). Ensure system is leak free.

Connect the tube to the DNV-33D power supply/display and apply 115 VAC. Allow 30 minutes for warm-up (see section 3.1).

Set the switch on the DNV-33D to the “OPR” position for normal operation (factory calibration).

Set the switch on the DNV-33D to the “Set A” position. The relay will now be energized when the pressure is less than the set point. The set point LED will be on when the relay is energized. The set point may be set by adjusting the appro- priate potentiometer on the front panel.

Set the switch on the DNV-33D to the “Set B” position. The relay will now be energized when the pressure is less than the set point. The set point LED will be on when the relay is energized. The set point may be set by adjusting the appro- priate potentiometer on the front panel.

Set the switch on the DNV-33D to the “CAL” position. This is to be used when zeroing the gauge with the tube at a pressure less than 0.1 mTorr.

Set the switch on the DNV-33D to the “TEST” position. Use this position to check the DNV-33D and to set the gain for individual tubes.

2.1Panel Mounting

The DNV-33D instrument package can be mounted in a 3-1/16 inch high by 3-5/8 inches wide hole. Secure the gauge with the mounting brackets provided.

2.2 Connect the GaugeTube wire to the gauge as follows:

REAR PANEL

GAUGE TUBE

WIRE COLOR

“TUBE”

PIN #

 

 

 

 

A

A

BLACK

 

 

 

C

C

WHITE

 

 

 

D

D

GREEN

 

 

 

2.3Connect other wires to relay contacts and output terminals.

2.4Gauge Tube Installation

Install the gauge tube in a clean, dry vacuum system with the open end pointing down so as to be self-draining should any vapors condense within the tube (See Sec. 5.1). For maximum accuracy, it is recommended that the tube be outgassed in the vacuum system for a minimum of 4 hours.

page 8

Image 8
Contents Teledyne Hastings Manual Print History Table of Contents Page Section General DescriptionPage Operating Principle 1Panel Mounting Installation Quick StartConnect the GaugeTube wire to the gauge as follows 1Powering ofVacuum Gauge Switch PositionCalibration and Troubleshooting Guide Operation of Vacuum Gauge2DNV-33 Calibration Reference CheckRecalibration for Different Length Gauge Tube Cables Optimizing Gauge Tube AccuracyOutgassing IngassingEffects of Thermal Conductivity Effects of System ConductanceNon-Warranty Repair Policy WarrantyWarranty Repair Policy

DNV-33D specifications

Teledyne DNV-33D is a cutting-edge underwater monitoring system, designed to deliver high-performance data acquisition and environmental monitoring in various marine settings. Combining advanced technologies with user-friendly interfaces, this system is perfect for applications in oceanography, marine research, and oil and gas exploration.

One of the standout features of the Teledyne DNV-33D is its multi-frequency sonar capabilities. This allows the system to capture detailed underwater images and provide precise measurements of both the physical and biological components of the marine environment. With frequencies ranging from low to high, users can tailor their data collection to meet specific project requirements, whether they are examining the seabed or studying aquatic life.

The system is equipped with state-of-the-art signal processing algorithms, enhancing the clarity and resolution of the captured data. These algorithms are essential for filtering out background noise and improving the detection of submerged objects, making it an invaluable tool for marine archaeologists and environmental scientists alike. The DNV-33D also supports real-time monitoring, enabling users to visualize data as it is collected and make instantaneous decisions.

Another key characteristic of the Teledyne DNV-33D is its robust construction, designed to withstand the harsh conditions of underwater environments. Its highly durable housing protects sensitive components from corrosion, pressure, and other potential damages, ensuring reliable operation even in the most challenging marine settings.

The system's portability further enhances its versatility, allowing for easy deployment in various locations, including shallow coastal areas and deep-sea environments. Users can easily transport it on research vessels or deploy it from unmanned underwater vehicles (UUVs), expanding the range of applications.

Additionally, the Teledyne DNV-33D is compatible with an array of sensors and accessories, enabling users to customize their monitoring setup. From temperature and salinity probes to advanced imaging systems, these options allow for a comprehensive assessment of environmental conditions.

In summary, the Teledyne DNV-33D stands out due to its advanced sonar technology, effective signal processing, rugged design, and adaptability. It serves as an essential tool for researchers and engineers aiming to enhance their understanding of underwater ecosystems while ensuring data integrity and accuracy. The system’s wide-ranging capabilities make it a vital asset in the ever-evolving field of marine exploration and monitoring.