Remove Transport Packaging
The appliance and the interior fittings are protected for transport.
•Remove all adhesive tape and packing pieces from the interior of the appliance.
Fix cover (C) on guide (A) until it clips into place.
A
Shelf holders
Your appliance is equipped with shelf retainers that make it possible to secu- re the shelves during transportation. To remove them proceed as follows:
Raise the shelf from the back, push it
A |
B |
C
PR33
in the direction of the arrow until it
is freed and remove the retainers.
Open the appliance door and the fur- niture door at 90°. Insert the small square (B) into guide (A). Put togeth- er the appliance door and the furni-
8mm |
Description of the appliance
|
| A - Dairy compartment | |
D | A | B - Can storage shelves | |
|
| C - Bottle storage shelf | |
E |
| D - Thermostat control | |
| B | E - | Glass shelves |
|
| F - | Glass shelf |
F |
| G - Salad drawers | |
G |
| H - Compartment for | |
C |
| freezing fresh food | |
|
| ||
|
| I - | Compartments for |
H |
|
| storing frozen food |
|
|
|
I
ture door and mark the holes as indi- cated in the figure. Remove the squares and drill holes with ø 2 mm at 8 mm from the outer edge of the door. Place the small square on the guide again and fix it with the screws supplied.
At the end of installation/adjusting, it is necessary to check if the door of the furniture closes properly.
Should adjustment of the furniture door be necessary, use the clearance of slots.
| A |
PR167 | B |
|
PR168 |
6 | 23 |