AEG 1450-7 TK manual Disposal, Remove transport packaging, Appliance Packaging Information

Page 6

Disposal

Appliance Packaging Information

All materials are environmentally sound! They can be disposed of or burned at an incinerating plant without danger.

About the materials: The plastics can be recycled and are identified as follows:

>PE< for polyethylene, e.g. the outer covering and the bags in the interior.

>PS< for polystyrene foam, e.g. the pads, which are all free of chloro- fluorocarbon.

The carton parts are made from recycled paper and should be disposed of at a waste-paper recycling collection location.

Disposal of old Appliances

For environmental reasons, refrigeration appliances must be disposed of properly. This applies to your old appliance, and - at the end of its service life - for your new appliance as well.

Warning! Before disposing of old appliances make them inoperable. Remove plug from mains, sever the power cable, remove or destroy any snap or latch closures. This ensures that playing children do not lock themselves inside the appliance (danger of suffocation!) or place themselves into other life-endangering situations.

Disposal:

•The appliance may not be disposed of with domestic waste or bulky refuse.

•The refrigerant circuit, especially the heat exchanger at the back of the appliance, must not be damaged.

•Information concerning collection schedules or locations can be obtained from your local Council or Environmental Health Office.

Remove transport packaging

The appliance and the interior fittings are protected for transport.

☞Pull off the adhesive tape on the left and right side of the door. You can remove any remnants of adhesive using white spirit.

☞Remove all adhesive tape and packing pieces from the interior of the appliance.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Santo 1450-7 TK Dear customer Contents Prior to initial start-up Important Safety InstructionsSafety of children RefrigerantDaily Operation Case of malfunctionAppliance Packaging Information DisposalRemove transport packaging Disposal of old AppliancesInstallation Installation LocationYour refrigerator needs air Special accessories Detaching the worktopMounting under a continuous worktop Reversing the door Prior to Initial Start-Up Changing over the freezer compartment doorElectrical Connection Description of the Appliance Plug socketView of the appliance Setting 1 means Starting up and temperature regulationSetting 0 means Off Setting 6 end-stop meansInterior Accessories Storage shelves/glass shelvesVario glass storage shelf Correct storage Freezing and storing frozen foodPreparation of Ice Cubes TipsDefrosting Fridge defrosts automaticallyDefrosting the freezer compartment Switching off the appliance Cleaning and CareEnergy Saving Tips Check the water drain hole on the rear wall of the fridgeSymptom Possible Cause Remedy What to do ifCorrecting Malfunctions Symptom Changing the light bulb Customer Care Service & Spare PartsHelp us to Help You 08705 929Noises during Operation Regulations, Standards, GuidelinesTechnical terminology Evaporator Compressor CondenserPage

1450-7 TK specifications

The AEG 1450-7 TK is a powerful and versatile tool that stands out in the realm of professional power tools. Designed primarily for heavy-duty applications, this model is part of AEG’s commitment to quality, performance, and durability, catering to both industry professionals and dedicated home users.

One of the main features of the AEG 1450-7 TK is its robust motor, which delivers an impressive power output of 1450 watts. This ensures that the tool can easily handle a range of tasks from drilling to chiseling in various materials, including concrete and masonry. The high power rating not only enhances performance but also increases efficiency, reducing the time needed to complete projects.

The tool boasts an ergonomic design that promotes user comfort during prolonged usage. It includes a soft-grip handle, which provides a secure and comfortable hold, minimizing fatigue. The lightweight construction of the AEG 1450-7 TK further adds to its usability, allowing users to maneuver the tool effortlessly in tight spaces.

In terms of technology, the AEG 1450-7 TK is equipped with a keyless chuck, making bit changes quick and simple. This feature is especially useful for professionals who need to switch between different tasks frequently. The tool also includes an adjustable speed setting, which allows for precision control depending on the application at hand.

Additionally, the AEG 1450-7 TK incorporates a durable, metal gearbox that enhances its longevity and resilience, ensuring it can withstand rigorous use on job sites. The impact function of this tool offers enhanced power for tougher materials, making it ideal for heavy-duty drilling applications.

For safety, this model features an overload protection system that prevents damage to the motor, thus extending the overall lifespan of the tool. An auxiliary handle is also available for improved control in demanding conditions.

Overall, the AEG 1450-7 TK represents a harmonious blend of power, comfort, and cutting-edge technology, making it an excellent choice for professionals and DIY enthusiasts alike. It not only gets the job done efficiently but ensures that users can rely on its performance consistently over time.
Top Page Image Contents