Whirlpool RF388LXG, RF385PXG Using the SELF-CLEANING Cycle, Example shows 41⁄2-hour cleaning time

USING THE SELF-CLEANING CYCLE

SETTING THE CONTROLS

NOTE: Make sure the clock is set to the correct time of day. (See “Setting the clock” in the “Using Your Range” section.)

1.Press AUTO CLEAN.

This will automatically set a 31⁄2-hour Self-Cleaning cycle.

NOTE: There will be a 30-minute cool-down

1⁄2 hour before the cycle is over.

PRESS YOU SEE

AUTO

CLEAN

CLEAN TIME

2.Set the cleaning time (optional).

If you want a Self-Cleaning cycle longer or shorter than 31⁄2 hours, use the hour and minute pads to set the cleaning time you want. Press the “up” (s) or “down” (t) pad(s) until a time between 21⁄2-41⁄2hours shows on the display.

•Use 21⁄2 hours for light soil.

•Use 31⁄2-41⁄2hours for average to heavy soil.

PRESS YOU SEE

HR MIN

CLEAN TIME

(example shows 41⁄2-hour cleaning time)

3.	Start the oven.	PRESS	YOU SEE
	The door will lock as soon as you press
	START/ENTER.	START		ON
		ENTER	HEAT	LOCK'D	CLEAN TIME
		5 SEC
4.	After Self-Cleaning cycle ends and the oven		YOU SEE
	reaches normal baking/roasting temperatures:
	LOCK’D goes off and the door unlocks.

CLEAN

5.After the oven cools to room temperature, wipe

off any residue or ash with a damp cloth or sponge.

If needed, touch up spots with a mildly abrasive cleanser or cleaning sponge.

26