Surface Burners
TYPICAL TCP BURNERRIME
I
Lift up the cooktop, following the instructions on page12.
Wipe off surface burners with warm soapy water and a soff cloth after each use.
Occasionally check surface burner flames for size and shape as shown. if flames do not burn properly, you may need to remove the surface burners for cleaning [see page16), or call a qualified technician for burner adjustments.
The Oven Door
Removing the oven door will make it easier to clean the oven.
Open the door to the flrst stop position.
2.Hold the door at both sides and lift off of hinges at bottom corners of door.
3.To replace, fit the bottom corners of the door over the ends of the hinges.
Push the door down evenly. The door will close only when it is on the hinges correctly.