the volume higher than the memory setting, the unit will return to the memory setting when turned back on. If, however, the unit is turned off with the volume lower than the memory setting, the unit will return to the lower setting when turned back on.
4BASS CONTROL
To adjust the bass level, first select the Bass mode by pressing the Select knob
3once so that the “BAS” indication appears on the display panel. Within 5 seconds of choosing the Bass mode, turn the knob clockwise to increase the bass response or
The level will be shown by the bars on the display panel from a minimum of
5MIDRANGE CONTROL
To adjust the midrange level, first select the Midrange mode by pressing the Select knob 3 twice so that the “MID” indication appears on the display panel. Within 5 seconds of choosing the Midrange mode, turn the knob clockwise to increase the midrange response or
response as desired. The level will be shown by the bars on the display panel | ||
from a minimum of | to a maximum of |
diamond in the center of the display represents flat response). The display will automatically return to the volume indication 5 seconds after the last adjustment is made.
6TREBLE CONTROL
To adjust the treble level, first select the Treble mode by pressing the Select knob 3 three times so that the “TRE” indication appears on the display panel. Within 5 seconds of choosing the Treble mode, turn the knob clockwise to increase the treble response or
response as desired. The level will be shown by the bars on the display | ||||
u |
|
| to a maximum of | |
panel from a minimum of |
| u | ||
| ----( the diamond in the center of the display represents flat |
response). The display will automatically return to the volume indication 5 seconds after the last adjustment is made.
7LEFT/RIGHT BALANCE CONTROL
To adjust the
clockwise to adjust it to the left channel speakers. The balance position will be | ||||||
shown by the bars on the display panel from L | R (full left) | |||||
to L |
| R (full right). | u |
|
| |
u |
| When the volume level between the left | ||||
and right speakers is equal, L |
| R will be shown on the display |
panel. The display will automatically return to the volume indication 5 seconds
after the last adjustment is made.