Whirlpool W10204511A, W10204320B warranty Troubleshooting

Page 10

TROUBLESHOOTING

First try the solutions suggested here or visit our website and reference Frequently Asked Questions (FAQs)

to possibly avoid the cost of a service call.

www.estateappliances.com, www.roperappliances.com or www.whirlpool.com

Nothing will operate

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

Is the power supply cord unplugged? Plug into a grounded 3 prong outlet.

Household fuse blown or circuit breaker tripped? Replace the fuse or reset the circuit breaker. If the problem continues, call an electrician.

Is the main or regulator gas shutoff valve in the off position?

See Installation Instructions.

Is the range properly connected to the gas supply? Contact a trained repair specialist or see Installation Instructions.

Surface burners will not operate

Is the oven in self-clean?

Surface burners will not operate during self-clean cycle.

Is the control knob set correctly? Push in knob before turning to a setting.

Is this the first time the surface burners have been used? Turn on any one of the surface burner knobs to release air from the gas lines.

Are the burner ports clogged?

See “Sealed Surface Burners” section.

Surface burner flames are uneven, yellow and/or noisy

Are the burner ports clogged?

See “Sealed Surface Burners” section.

On models with caps, are the burner caps positioned properly?

See “Sealed Surface Burners” section.

Is propane gas being used?

The range may have been converted improperly. Contact a service technician or see cover for contact information.

Surface burner makes popping noises

Is the burner wet? Let it dry.

Gas range noises during Bake and Broil operations

Noises that may be heard during the Bake and Broil operations: Whooshing, Poof, Clicking, Snaps, Pop

These sounds are normal operational noises that can be heard each time the Bake or Broil burners ignite during the cycle.

A pop can be heard when the gas valve is opening or cycling on and will make a single pop when it snaps open from the solenoid. It sounds similar to a suction cup being pulled off of a piece of glass.

The igniters will click several times until the flame is detected. These are short clicking sounds like tapping a nail onto a piece of glass.

A whooshing or poof sound is heard when the Bake or Broil burner ignites.

On some models, a clicking sound can be heard when the convection fan relay cycles on and off.

Excessive heat around cookware on cooktop

Is the cookware the proper size?

Use cookware about the same size as the surface cooking area, element or surface burner. Cookware should not extend more than ½" (1.3 cm) outside the cooking area.

Cooktop cooking results not what expected

Is the proper cookware being used?

Ideal cookware should have a flat bottom, straight sides and a well fitting lid, and the material should be of a medium to heavy thickness.

Is the control knob set to the proper heat level? See “Cooktop Use” section.

Is the range level?

Level the range. See the Installation Instructions.

Oven will not operate

Is this the first time the oven has been used?

Turn on any one of the surface burner knobs to release air from the gas lines.

Is the electronic oven control set correctly? See “Electronic Oven Controls” section.

Oven burner flames are yellow or noisy

Is propane gas being used?

The range may have been converted improperly. Contact a service technician or see cover for contact information.

Oven temperature too high or too low

Does the oven temperature calibration need adjustment? See “Oven Temperature Control” section of the “Electronic Oven Controls” section.

10

Image 10
Contents GAS Range User Instructions Range Safety Your safety and the safety of others are very importantImportant Safety Instructions Anti-Tip BracketFeature Guide Cooktop USE Power FailureTo Clean Sealed Surface BurnersElectronic Oven Controls Oven USEAluminum Foil Baking and Roasting Positioning Racks and BakewareOven Vent BroilingSelf-Cleaning Cycleon some models Range CareExterior Porcelain Enamel Surfaces on some General CleaningOven Light Stainless Steel on some modelsTroubleshooting Accessories This limited warranty does not cover W10204320B SP PN W10204511A

W10204320B, W10204511A specifications

The Whirlpool W10204511A and W10204320B are essential components in the realm of home appliance maintenance, designed to enhance the performance and efficiency of various Whirlpool washing machines and dishwashers. These parts are not merely accessories; they are integral to the optimal functioning of these appliances, ensuring longevity and reliability.

The W10204511A model is primarily known for its role as a washer drain pump. This pump is responsible for removing water from the washing machine’s drum after the wash and rinse cycles. Its robust design allows for efficient water extraction, which is critical for preventing water buildup and ensuring that clothing is properly washed. This can lead to better cleaning results and can also protect the machine from potential water damage over time. The durability of the pump is a crucial characteristic, as it is subjected to the rigors of regular use, making it essential for users who rely on their washing machines for consistently clean laundry.

On the other hand, the W10204320B model serves as a vital component for various Whirlpool dishwashers. Specifically, it functions as a wash impeller, which is responsible for directing water throughout the dishwasher during the wash cycle. This part is critical in ensuring that water reaches all areas of the dishwasher, providing powerful and effective cleaning for dishes, pots, and pans. Its innovative design helps enhance cleaning performance, allowing users to enjoy sparkling clean dishes after every cycle.

Both models showcase Whirlpool’s commitment to quality and performance. They are built with high-quality materials that support long-term use, minimizing the chances of wear and tear. Furthermore, these components are designed for easy installation, allowing homeowners to carry out repairs without needing professional assistance. This user-friendliness is an important feature that reflects Whirlpool’s understanding of customer needs.

In summary, the Whirlpool W10204511A and W10204320B represent the brand's dedication to producing parts that enhance appliance functionality. Their main features include high durability, efficient operation, and ease of installation, making them ideal choices for anyone looking to maintain or improve their Whirlpool appliances. Whether it's the efficient drainage of the washer or the effective washing of dishes, these components play a vital role in everyday home maintenance.