Whirlpool SF379LEK, SF380LEK manual Electronic Oven Control

ELECTRONIC OVEN CONTROL

3

		1	2	4	5	6	7	8	9	10
1.	Oven Settings	4.	Clock						8.	Minute
2.	Temperature	5.	Timer						9.	Start/Enter (Control Lock)
3.	Display	6.	Oven Light						10.	Off/Cancel
		7.	Hour
		Display								Timer

When power is first supplied to the appliance, “PF” will appear on the display. Press OFF to clear.

Any other time “PF” appears, a power failure has occurred. Press OFF and reset the Clock if needed.

When the oven is not in use, the display shows the time of day.

When using COOK TIME (on some models,) the display will show either hours and minutes, or minutes and seconds.

Start/Enter

The START/ENTER pad begins any oven function except the Timer. If not pressed within 5 seconds after pressing a function pad, the “START?” indicator light will flash as a reminder. On some models, “START?” will appear on the display.

If not pressed within 4 to 5 minutes (depending on your model) after pressing a function pad, the oven display will return to the time of day mode and the programmed function will be cancelled.

Off/Cancel

The OFF pad stops any function except the Clock, Timer and Control Lock.

The Timer can be set in hours or minutes up to 12 hours and 59 minutes, and counts down the set time. The Timer does not start or stop the oven.

To Set:

1.Press TIMER SET.

If no action is taken after one minute, the display will return to the time of day mode.

2.Press the HR or MIN “up” or “down” arrow pads (buttons) to set the length of time.

3.Press START.

If not pressed within 5 seconds, the display will return to the time of day mode and the programmed function will be cancelled.

When the set time ends, end-of-cycle tones will sound, then, if on, reminder tones will sound every minute.

4.Press TIMER OFF anytime to cancel the Timer.

Remember, do not press the OFF pad (button) because the oven will turn off.

To display the time of day when the timer is counting down, press

CLOCK.

Clock

On some models, if you do not want the clock time to be displayed, press and hold the CLOCK pad (button) for 5 seconds. When the clock is not displayed, you can see the time for 5 seconds by pressing the CLOCK pad (button).

To Set:

Before setting, make sure the oven, TIMER and COOK TIME are off.

1.Press CLOCK.

2.Press the HR or MIN “up” or “down” arrow pads (buttons) to set the time of day.

3.Press CLOCK or START.

Control Lock

The Control Lock shuts down the control panel pads to prevent unintended use of the oven.

When the control is locked, only the CLOCK and TIMER pads will function.

To Lock/Unlock Control: Before locking, make sure the oven and Timer are off. Press and hold START/ENTER for 5 seconds. A single tone will sound, “LOC” and “LOCK’D” (on some models) will appear on the display. “LOC” will also appear whenever any command pad is pressed while the control is locked.

Repeat to unlock. “LOC” and “LOCK’D” (on some models) will disappear from the display.

9