The electronic oven controls
There are three parts in the oven control section:
Instructions for each oven control are covered on the following pages. Read them carefully.
When you first plug in the range, the time display will flash until you set a new time. If, after you set the clock (page 8) the time display flashes, your electricity was off for a while. Reset the clock.
Digital display/clock
When you are not using the oven, this is an accurate digital clock. When using the oven or Minute Timer, the display will show the time, temperature settings and what command buttons have been pressed.
When showing the time of day, the display will show the hour and minutes.
When using the Minute Timer, the display shows minutes and seconds in the following sequence:
For settings from 0 minutes to 1 minute 55 seconds, the display will increase in 5second increments.
For settings from 2 minutes to 9 minutes 50 seconds, the display will increase in
For settings from
For settings from 1 hour to 1 hour 55 minutes, the display will increase in
When using Bake Time, the display shows hour and minutes.
Command buttons
The command buttons tell the oven what to do and in what order. A few examples:
Each command button (except Oven Off) has its own indicator. The indicator comes on when you touch the command buttons.
Set Knob
Once you’ve pushed a command button to tell the oven what you want it to do, you’ll use the Set Knob to set a temperature or time. Turning the Set Knob clockwise increases the number on the display. Turning the Set Knob counterclockwise decreases the number on the display.