Cooktop USE, CooktopControls | Whirlpool SF196LEPB1 instruction

COOKTOP USE

CooktopControls

WARNING

Fire Hazard

Do not let the burner flame extend beyond the edge of the pan.

Turn off all controls when not cooking.

Failure to follow these instructions can result in death or fire.

Electric igniters automatically light the surface burners when control knobs are turned to IGNITE.

Before setting a control knob, place filled cookware on the grate. Do not operate a burner using empty cookware or while the grate is unoccupied.

To Set:

1.Push in and turn knob counterclockwise to IGNITE.

All four surface burners will click. Only the burner with the control knob turned to IGNITE will produce a flame.

2.Turn knob anywhere between HIGH and LOW. Use the following chart as a guide when setting heat levels.

SETTING	RECOMMENDED USE

IGNITE	■	Light the burner.

HIGH	■	Start food cooking.
	■ Bring liquid to a boil.

Between	■	Hold a rapid boil.
HIGH and LOW	■	Quickly brown or sear food.
	■	Quickly brown or sear food.
	■ Fry or sauté foods.
	■ Cook soups, sauces and gravies.
	■ Stew or steam foods.

LOW	■	Keep food warm.
	■	Simmer.

REMEMBER: When range is in use or (on some models) during the Self-Cleaning cycle, the entire cooktop area may become hot.

Power™ Burner (on some models)

The left front burner is designed to give ultra-high power when it is fully on. It can be used to rapidly bring liquid to a boil and to cook large quantities of food.

ACCUSIMMER® Burner (on some models)

The right rear burner has an adjustable heat setting for more precise simmering and low temperature cooking.

Power Failure

In case of prolonged power failure, the surface burners can be lit manually. Hold a lit match near a burner and turn knob counterclockwise to IGNITE. After burner lights, turn knob to setting.

SealedSurfaceBurners

IMPORTANT: Do not obstruct the flow of combustion and ventilation air around the burner grate edges.

A. Burner cap

B. Burner base

C. Alignment pins

D.Igniter

E.Gas tube opening

Burner cap: Always keep the burner cap in place when using a surface burner. A clean burner cap will help prevent poor ignition and uneven flames. Always clean the burner cap after a spillover and routinely remove and clean the caps according to the “General Cleaning” section.

Gas tube opening: Gas must flow freely throughout the gas tube opening for the burner to light properly. Keep this area free of soil and do not allow spills, food, cleaning agents or any other material to enter the gas tube opening. Protect it from spillovers by always using a burner cap.

A.1-1¹⁄₂" (25-38 mm)

B.Burner ports

Burner ports: Check burner flames occasionally for proper size and shape as shown above. A good flame is blue in color, not yellow. Keep this area free of soil and do not allow spills, food, cleaning agents or any other material to enter the burner ports.

SF196LEPB1 specifications

The Whirlpool SF196LEPB1 is a standout model in the realm of refrigeration, offering an impressive blend of innovative features, technology, and user-centric design. This refrigerator is designed to address the modern consumer's needs for both functionality and efficiency.

One of the main features of the SF196LEPB1 is its spacious interior, which provides ample storage capacity to accommodate a family’s needs. The refrigerator boasts an efficient compartment layout with adjustable shelves, allowing users to optimize space for larger items, such as tall bottles or casseroles. The inclusion of door bins and crisper drawers enhances organization, making it easy for users to access their essentials.

In terms of technology, the Whirlpool SF196LEPB1 employs advanced cooling systems designed to maintain consistent temperatures throughout the refrigerator and freezer sections. This ensures food stays fresh for longer periods, reducing waste and improving overall food safety. The refrigerator is equipped with a frost-free feature, which alleviates the need for manual defrosting, thus saving time and effort for the user.

Another noteworthy characteristic of the SF196LEPB1 is its energy efficiency. It is designed to consume less power than conventional models, helping users to reduce their electricity bills while minimizing their environmental footprint. This sustainability aspect is increasingly important in today’s eco-conscious market.

The design of the Whirlpool SF196LEPB1 also prioritizes aesthetics, featuring a sleek and modern exterior that fits seamlessly into various kitchen styles. Available in multiple finishes, including classic white, black, and stainless steel, homeowners can choose a look that best complements their kitchen decor.

Moreover, this refrigerator incorporates user-friendly controls, making it simple to adjust settings and monitor temperatures. Some models offer additional features like water and ice dispensers for added convenience.

In conclusion, the Whirlpool SF196LEPB1 is an exceptional refrigerator that combines practicality with advanced technology. Its spacious design, energy efficiency, and modern aesthetics make it a perfect choice for any household seeking reliability and style in their kitchen appliances. This model truly stands out as a testament to Whirlpool's commitment to quality and innovation.