Cornelius UFB-1, UF-1 manual System Details

Page 14

UF-1 and UFB-1 Valves Training Manual

2.SYRUP/CONCENTRATE

Syrup should always be precooled before setting the ratio. Syrup takes a path through the valve parallel to the water path. It is introduced in the block, travels through a syrup flow control, banjo, valve head and out the nozzle. Note, concentrate is not cooled.

High sugar syrups are more viscous (thicker) than diet syrups and consequently have more pressure drop within a system. This pressure drop results in less flow at the valve and therefore a slower fill time. Increasing the pump pressure will help overcome the pressure drop caused by high sugar syrups.

3.SETTING RATIOS

If the ratio varies and must be adjusted often, it is probably the result of a restricted syrup system. It is then time to clean and sanitize the syrup tubing and cooling coils and check for other problems such as syrup pumps, etc.

Note: Try raising the pressure on the pump before cleaning.

Set the water flow rate first, then adjust the syrup to the desired ratio. This gives the most accurate valve flow setting possible. Measure the ratio and adjust the syrup flow, if necessary. This will result in uniform flow, better carbonation retention, and improved drink quality.

When using a ratio cup always take these

precautions to ensure accuracy:Ratio

SYSTEM DETAILS

• After installing the separator tube, open

the valve to fill the syrup tube before starting the ratio test.

Clean the cup thoroughly between tests so there is no carry–over from one test to the next.

Fill the cup to approximately 3/4 full

and use approximately the same quan- tity for each test to ensure accurate set- tings.

Cups

• Take another sample to verify the set-

Syrup

tings.

Separator

 

- 8 -

© 1999-2005, IMI Cornelius Inc.

Image 14
Contents UF-1 and UFB-1 Valves Blank Training Manual UF-1 Valves Manual Table of Contents Attachments Review Introduction Preview QuestionsProduct Description Cup Dimensions & Capacities IntroductionWater Flow System DetailsWater Quality Adjusting Flow Rates Calculating Flow Rates System Details UF-1 and UFB-1 Valve Disassembly Remove water screw and lever if it is installed Carefully remove banjo lever springs Mounting Block Disassembly UF-1 and UFB-1 Portion Control Valve Controls and ElectricalUF-1 and UFB-1 OptifillTM Valve OptifillTM Valve ProgrammingProgram switch hidden Requirements Summary InstallationUF-1 and UFB-1 Valve Installation Procedure Electrical RequirementsInstallation Checklist Mounting Block RemovalCleaning Valve ServicePreventative Maintenance Procedures Trouble Shooting Excess FoamOff Taste Valve Stuck Open No Product Attachments Review Circle the correct answer Review Review UF-1 and UFB-1 Valves Training Manual Page IMI Cornelius Inc

UF-1, UFB-1 specifications

Cornelius UFB-1 and UF-1 represent a significant advancement in the realm of recreational watercraft, specifically designed for enthusiasts seeking optimal performance and comfort on the water. These models symbolize the culmination of innovative engineering and user-centric design, aimed at improving the overall boating experience.

One of the standout features of the Cornelius UFB-1 is its lightweight construction, which utilizes advanced composite materials. This not only enhances the craft’s maneuverability but also maximizes fuel efficiency. The hull design is streamlined to reduce resistance in the water, allowing for faster speeds and better handling, particularly in challenging conditions. The UF-1, while similar in construction, offers a slightly larger profile, providing additional stability, making it ideal for families or those looking to enjoy leisure outings.

Both models are equipped with cutting-edge technology, including digital displays for navigation and performance monitoring. These interfaces offer real-time data, enabling users to make informed decisions while out on the water. The integration of GPS systems enhances safety by allowing users to plot courses and avoid hazards with ease. Furthermore, the vessels are designed to support wireless connectivity, enabling users to stay connected even while away from shore.

Comfort and convenience are paramount in the design of the Cornelius UFB-1 and UF-1. The spacious interior layouts provide ample seating and storage options, allowing for extended trips without sacrificing comfort. The seating materials are selected for durability and ease of maintenance, ensuring that the vessels can withstand the rigors of regular use. Additional features, such as retractable awnings and adjustable sun pads, enhance the experience by providing relief from the sun during hot days on the water.

Safety is another crucial aspect, with both models outfitted with essential equipment including life jackets, navigation lights, and fire extinguishers. The design also incorporates safety features like non-slip flooring and high-quality handrails to ensure stability when moving around the vessel.

In summary, the Cornelius UFB-1 and UF-1 deliver exceptional performance, technological innovation, and comfort, making them a top choice for watercraft enthusiasts. With their focus on user experience and safety, these models set a new standard in the recreational boating market, promising unforgettable adventures on the water.