Cornelius CCM1530, DF2XX 30 installation instructions Installation Instructions, Name Qty

Page 1

ED/DF2XX 30” CCM1530 Nordic Style Lid Kit Installation Instructions

INSTALLATION INSTRUCTIONS

ED/DF2XX 30” CCM1530 NORDIC SS STYLE LID KIT

This Nordic style kit applies to the Cornelius 30” Wide CCM1530 Nordic ice maker.

 

Item

Part No.

Name

Qty.

 

No.

 

 

 

 

 

 

 

 

 

1

 

620046139

Icemaker Adapter Lid

1

 

 

 

 

 

2

 

620050521

Manual Fill Cover

1

 

 

 

 

 

3

 

620051215

Icemaker Mounting Bracket

2

 

 

 

 

 

5

 

50904

RTV Sealant 3 oz. Tube

1

 

 

 

 

 

6

 

620701601

# 10 x 1/2” Sheet Metal Screw

8

 

 

 

 

 

7

 

620204719INS

Installation Instructions

1

 

 

 

 

 

8

 

630500109

Bin Stat

1

 

 

 

 

 

CAUTION: Disconnect electrical power to the dispenser before proceeding with the icemaker adapter kit installation.

1.Position the icemaker adapter lid (item 1), flush with the rear of the cabinet, on the dispenser.

2.Seal the icemaker base to the adapter lid as follows:

A.Locate the icemaker 2 inches from the rear and flush with the sides of the lid. Run a bead of RTV inside the perimeter of the icemaker base so that the base will set on the RTV.

B.Set the icemaker onto the lid. Note: If installing the icemaker from the front of the dispenser, use a piece of 1” PVC pipe or larger as a “roller” to slide the icemaker over the front mounting bracket of the manual fill cover.

C.Wipe away any excess RTV.

3.With the icemaker installed on top of the adapter lid, drill .147 diameter holes (# 26 drill) into the dis- penser cabinet using the slotted holes in the side flanges of the lid as templates. Be careful not to drill into the ice storage hopper. Use of a drill stop (1/4 in.) is recommended. Secure the lid to the cabinet with (4) # 10 sheet metal screws (item 6).

4.Drill .147 diameter holes into the icemaker cabinet and adapter lid using the icemaker mounting brackets (item 3) as templates. Be careful not to drill into any icemaker component (con- denser, tubing, etc.). Secure the mounting brackets to the icemaker and adapter lid with the # 10 sheet metal screws (item 6) provided in the kit.

5.Install the wire form bracket, supplied with the bin stat kit (item 4), through the 5/8” diameter hole in the bottom of the ice maker. Wrap the eye of the wireform over the stud near the hole to the end of the wireform bracket and wrap the tube around the end of the bracket several times, insuring the tube is secure.

NOTE: The bin stat must not interfere with the agitator rotation or in the path of ice falling from the icemaker. If it interferes with the agitator or in the path of ice, bend the bracket out of the way.

6.Check that the automatic agitation timer, located in the dispenser’s electrical control box, is set for automatic fill cube ice. The control box is located behind the merchandiser. Remove the merchan- diser by lifting up on the sides to disengage the mounting “hooks” from the cabinet slots and rotate it forward. Refer to the label in the control box for setting agitation times.

7.Install the manual fill cover (item 2) on the adapter lid (item 1). Insert the hinge pins into the pivot brackets on the adapter lid with the cover open. Check that cover opens and closes correctly.

Release Date: October 5, 2007

www.cornelius.com

Revision: A

© 2007, IMI Cornelius Inc.

- 1 -

Publication Number: 620204719INS

Image 1
Contents ED/DF2XX 30 CCM1530 Nordic SS Style LID KIT Installation InstructionsName Qty ED/DF2XX Kit Bin Stat

620050521, 620051215, 620046139, 620701601, 620204719INS specifications

The Cornelius DF2XX series represents a cutting-edge advancement in beverage dispensing technology, specifically designed for high-volume environments such as restaurants, bars, and convenience stores. Among the models within this series are the CCM1530, 630500109, 620204719INS, and 620701601, each engineered to deliver superior performance and versatility.

One of the main features of the DF2XX series is its high-capacity design, which allows for efficient dispensing of both carbonated and non-carbonated beverages. These systems can be configured to serve a wide variety of drinks, including sodas, juices, and cocktails, making them incredibly versatile for any foodservice operation. The ability to customize the drink selections enhances customer satisfaction and boosts sales.

The Cornelius DF2XX models are equipped with advanced refrigeration systems, ensuring that beverages are served at optimal temperatures. This not only improves the taste but also prolongs the freshness of the drinks. The systems utilize energy-efficient technology, which helps businesses reduce operational costs while maintaining high-quality service.

Another notable characteristic is the user-friendly interface. The touchscreen controls are intuitive, allowing staff to quickly select and dispense products with minimal training. This feature streamlines service, especially during peak hours, reducing wait times for customers and enhancing overall service efficiency.

In terms of construction, the DF2XX series boasts durable stainless steel exteriors that are easy to clean and maintain. This ensures the units can withstand the rigors of a busy commercial environment while maintaining a professional appearance. The modular design also allows for easy repairs and upgrades, which can significantly lower maintenance costs over time.

The integration of smart technology in the DF2XX series sets it apart from many traditional systems. IoT capabilities enable remote monitoring, diagnostics, and updates, allowing operators to manage their equipment more effectively. This innovation not only enhances operational efficiency but also provides valuable insights into usage patterns, enabling better inventory management.

In summary, the Cornelius DF2XX 30, CCM1530, 630500109, 620204719INS, and 620701601 models are exemplary in both performance and design. With their high-capacity, energy-efficient refrigeration, user-friendly interfaces, durable construction, and smart technology integration, these beverage dispensers are well-suited for any high-demand beverage service environment. The DF2XX series encapsulates the future of beverage dispensing, combining convenience, efficiency, and advanced technology.