Whirlpool GS395LEH warranty STARTING/CANCELING a Function, To cancel the minute timer

STOP

TIME

DELAY

START

TIME

5 SEC

TONES

ENTER

START

USING YOUR RANGE

USING THE ELECTRONIC MINUTE TIMER (CONT.)

When the time is up:	YOU SEE
You will hear four 1-second tones, then four
1-second reminder tones every minute until you
press the timer off pad.	TIMER
NOTE: To remove the reminder tones, press and
hold TIMER SET for 5 seconds. To bring back
the tones, follow the same step. You will see
“OFF” when the tones are turned off and “on”
when they are turned on.

4. Turn off the minute timer.	PRESS	YOU SEE
	TIMER
	OFF
		(time of day)

To cancel the minute timer:

PRESS YOU SEE

Press TIMER OFF.	TIMER
	OFF

(time of day)

STARTING/CANCELING A FUNCTION

After setting a function, you must press START/ ENTER to start the function. If you do not press START/ENTER within 5 seconds of setting, “START?” will show on the display as a reminder.

OFF/CANCEL will cancel any function except the

	clock, timer, or control lock. When you
OFF	press OFF/CANCEL, the display will show
	the time of day or, if the minute timer is
CANCEL
	also being used, the time remaining.

Tones tell you if a function is entered correctly or not. They also tell you when a cycle is completed.

To shut off all tones except the end-of-timer and error tones:

Press and hold STOP TIME for 5 seconds. A short tone will sound to tell you the tones have been changed. Repeat to turn the tones back on. You will see “oFF” for 3 seconds when the tones are turned off and “on” for 3 seconds when they are turned on.

To choose between high and low volume tones:

Press and hold DELAY START TIME for 5 seconds. A short tone will sound to tell you the tones have been changed. Either “HI” or “LO” will appear on the time display for 3 seconds to show the volume you chose.

12