Setting the Temperature Control

DOOR REMOVAL

If door must be removed to fit through narrow doorways:

1.Gently lay refrigerator on its back, on a throw rug or blanket.

2.Remove the base panel by unscrewing two screws from front of base panel.

3.At the top of the cabinet, lift up plastic hinge cover, and fold back. (Figure 1)

4.Use a Phillips® screwdriver to loosen and retighten the screws on the top hinge to ensure a secure assembly, and prevent hinge slippage.

5.Remove the top hinge from cabinet, and lift door off lower hinge pin.

6.After door is removed, remove the two screws from the bottom hinge.

7.To replace door, reverse above order.

Refrigerator Door Adjustments

Figure 1

•Cover foods and wipe containers dry before placing them in the refrigerator. This cuts down on moisture build-up inside the unit.

•Organize the refrigerator to reduce door openings. Remove as many items as needed at one time and close the door as soon as possible.

COOL DOWN PERIOD

For safe food storage, allow 4 hours for the refrigerator to cool down completely. The refrigerator will run continuously for the first several hours.

TEMPERATURE CONTROL

The temperature control is located inside the refrigerator. The temperature is factory preset to provide satisfactory food storage temperatures. However, the temperature control is adjustable to provide a range of temperatures for your personal satisfaction. If a colder temperature is desired, turn the temperature control knob toward COLDEST and allow several hours for temperatures to stabilize between adjustments.

REFRIGERATOR FEATURES

INTERIOR LIGHT

The light comes on automatically when the door is opened. To replace the light bulb, turn the temperature control to OFF and unplug the electrical cord. Replace the old bulb with a bulb of the same wattage.

ADJUSTABLE INTERIOR SHELVES

ENERGY SAVING TIPS

• Install the refrigerator in the coolest part of the room,

out of direct sunlight and away from heating ducts or

registers. Do not place the refrigerator next to heat-

Multi-position adjustable interior shelves can be moved to any position for larger or smaller packages. The shipping spacers that stabilize the shelves for shipping should be removed and discarded.

Adjustable Interior Shelves

	producing appliances such as a range, oven or
	dishwasher.
•	Level the refrigerator so the doors close tightly.
•	Do not overcrowd the refrigerator or block cold air

vents. Doing so causes the refrigerator to run longer and use more energy. Shelves should not be lined with aluminum foil, wax paper or paper toweling. Liners interfere with cold air circulation, making the refrigerator less efficient, which could cause food spoilage.

AUTOMATIC FREEZE CONTROL

The Freeze Control Feature will maintain proper interior refrigerator temperature even when the refrigerator is placed in an area where the surrounding temperature drops down to 10° F (-12° C).