Whirlpool RF3000XV manual Adjusting Oven Temperature Control

Page 8

Adjusting

the Oven

Temperature

Control

 

 

Does your oven seem hotter or colder than your old oven? The temperature

of your old

oven may have shifted gradually

without you noticing the change.

Your new oven is properly

adjusted to provide

accurate

temperatures.

But when

comparing

to your old oven, the new design

may give

you different

results.

If after using the oven for a period of time, you are not satisfied with the temperature settings, they can be adjusted by following these steps:

1.Pull the Oven Temperature Control Knob straight off.

NOTCHESTOOTH

3.To lower the temperature, move the tooth a notch closer to LO. Each notch equals about IOE (5°C).

2.Loosen the locking screws inside the control knob. Note the posi- tion of the notches.

TOOTHNOTCHES

4.To raise the temperature, move the tooth a notch closer to HI. Each notch equals about 1O’;F(5°C).

Tighten the locking screws and replace the control knob.

8

Image 8
Contents Page Contents Before you use your rangeFor Your Safety Parts and features Model RF3000XVUsing your range Using the Surface UnitsSurface Unit Indicators Signal lightOptional Canning Kit Part no Using the Oven Controls BakingAdjusting Oven Temperature Control Broiling Custom BroilOven Vent Optional RotisserieCaring for your range Control Panel and KnobsSurface Units and Reflector Bowls RemovingReplacing Lift-Up Cooktop Oven DoorLower Panel Standard Oven CleaningUsing Foil Cleaning Chart Part What To USEBefore calling for assistance If you need assistance?If you need service If you have a problems’Page Page Warranty