Foster 18 7167-042 manual IT is mandatory to earth the appliance

Page 4

IT is mandatory to earth the appliance:

If the appliance is directly connected to the mains electricity, an omnipolar switch with contact gap of at least 3 mm - able to withstand the oven's power output - must be installed between the oven and power socket.

The earth wire must by no means be interrupted by the omnipolar switch.

Always ensure that the oven is disconnected from the power supply before effecting maintenance work and/or adjustments.

The oven may be supplied without a plug fitted on the power cord. If this occurs, choose a plug that can withstand the oven's maximum power output. Make sure that the earth wire (yellow/green) is properly connected to the relative plug pin.

Follow the steps below when connecting or replacing the power cable:

Disconnect the appliance or the power supply.

Open the terminal board cover.

Connect the ends of the power cable - remember that the earth wire is identified by the yellow/green jacket. If using a BS 1363-approved 13 A plug, apply a 13 A fuse.

The power cable must be secured by the cable clamp on the terminal board to prevent it from turning and/or detaching. No point of the cable must be exposed to temperatures exceeding 75 °C.

The plug connecting the appliance to the mains electricity must be suitable for the oven's power output. Moreover, the plug must be easily accessible once the oven has been installed. An omnipolar switch with a contact gap of at least 3 mm must be installed in the event of a direct connection to the mains electricity.

morsettiera

bloccacavo

terra

terminal board

cable clamp

earth

21

Image 4
Contents 7167-042 Precautions for Safe Operation Installation Instructions IT is mandatory to earth the appliance Use a flexible three-wire cable type H05RR-F 3x1.5 mm ON/OFF thermostat indicator light ON/OFF power indicator lightOperating Instructions Electronic programmer Automatic operation mode TimerIdentifying programming errors Cancelling a programmeOven temperature thermostat Commutator or oven function selectorOven lamp Regular static cookingBottom-end cooking Top-end cookingGrill Rotisserie grillVentilated grill Intensive cooking with hot airIntense cooking with hot air Thawing and dryingPage Maintenance Instructions Cleaning safetyCleaning the oven surface Removing the oven doorRemoving the internal glass plate of the oven door 4 screws Page Oven Specifications Electrical dataEND-OF-LIFE Product Disposal Foster S.p.A

18 7167-042 specifications

The Foster 18 7167-042 is a cutting-edge piece of technology known for its efficiency and versatility. This innovative product merges advanced engineering with user-friendly design, making it a standout choice in its category.

At the heart of the Foster 18 7167-042 is its powerful motor, capable of delivering consistent performance under varying load conditions. This feature is particularly important for users who require reliability in demanding environments. The motor operates at low noise levels, ensuring that the device can be used in settings where sound pollution is a concern, such as in residential neighborhoods or offices.

Another key characteristic of the Foster 18 7167-042 is its energy efficiency. Designed with the latest technologies, this model optimizes energy consumption without compromising on performance. This is a significant advantage for businesses and individuals looking to reduce their carbon footprint while also saving on electricity costs.

The device incorporates smart technology that enhances its usability. An intuitive interface allows users to easily navigate through settings and features, making it accessible for all skill levels. Additionally, the Foster 18 7167-042 is equipped with diagnostic capabilities that provide real-time feedback on performance and maintenance needs, allowing users to keep the device in optimal condition.

Durability is another highlight of the Foster 18 7167-042. Constructed from high-quality materials, it can withstand the rigors of daily use, making it an ideal choice for both industrial and domestic applications. Its rugged design helps prevent damage from accidental drops or impacts, ensuring longevity.

Safety features are also prominent in the Foster 18 7167-042, which includes automatic shut-off mechanisms and overload protection. These intuitive safety measures protect both the user and the device, reducing the risk of accidents and ensuring a secure operating environment.

In summary, the Foster 18 7167-042 is an exemplary model that combines power, efficiency, and safety. With its advanced motor technology, energy-saving capabilities, intuitive design, and remarkable durability, this device stands as a reliable option for a wide range of applications, addressing the needs of modern users while promoting sustainability and safety.