Installation

Before hooking-up to the mains supply, make sure that:

-the socket has a ground connection and complies with legal regulations;

-the socket is able to withstand the oven's maximum power capacity indicated on the rating label (also see below);

-The power supply voltage is within the values listed in the electrical characteristics label (see below);

-the socket is compatible with the appliance plug.

-If this is not the case, replace the socket or the plug. Do not use extension cords or multiple sockets.

-Once the appliance is installed, the electrical cable and the electrical power socket must be easy to reach.

-The cable must not be bent or compressed.

-The cable must be periodically checked and only replaced by authorized technicians.

-The Company declines all responsibility if these instructions are not adhered to.

Replacement of the power cable:

If the power cable needs to be replaced, use cables of the following type only:

-H05 RR-F

-H05 V2V2-F (T90)

which are suitable for the operating capacity and temperature. The green-yellow ground cable must be longer than the other two conductors by approximately 2cm.

Important: any adjustments, maintenance, etc. must be executed with the oven disconnected from electricity.

To guarantee proper operation of the built-in appliance, the furniture unit must have suitable characteristics:

-the panels adjacent to the oven must be constructed in heat resistant materials;

-in the case of veneered wood furniture units, the glue must be heat resistant to temperatures up to 100°C;

The oven must be located in a standard opening of 410mm, as shown in the first page of the booklet, whether under a counter or in a column position.

When inserting the oven into a column it is indispensable to ensure adequate ventilation by installing openings as illustrated in the figure.

The oven is secured to the furniture unit by four “A” screws located in the holes of the frame.

Make sure not to lift the oven by its door when inserting it; furthermore, do not place excessive pressure on the door when it is open.

Note: if no opening has been anticipated in the upper part of the column furniture, make a hole in the lower part of the column, as shown in the drawing.

7145 000 specifications

Foster 7145 000 is an advanced electronic platform designed to enhance the efficiency and functionality of various applications. This device integrates state-of-the-art technology, delivering high performance in various fields such as automation, robotics, and IoT (Internet of Things) solutions.

One of the main features of the Foster 7145 000 is its robust processing capability. It employs a powerful multi-core processor that ensures fast and reliable performance. This feature allows for handling complex computations and multitasking without lag, making it suitable for demanding environments. The combination of high processing power and efficient thermal management ensures that the device can operate effectively under rigorous conditions.

Another notable aspect of the Foster 7145 000 is its connectivity options. It supports a wide range of communication protocols, including Wi-Fi, Bluetooth, and Ethernet. This versatility allows the device to integrate seamlessly with other systems, enabling data exchange and remote control capabilities. As organizations increasingly adopt smart technologies, the connectivity features of the 7145 000 position it well for integration into modern ecosystems.

In terms of its design, the Foster 7145 000 is notable for its compact and durable build. It is engineered to withstand challenging environments, featuring a rugged casing that protects its internal components from dust, moisture, and physical impacts. This makes it ideal for industrial applications where reliability is crucial.

The device also comes equipped with advanced sensors, which enhance its operational capabilities. These sensors facilitate real-time data collection and analysis, allowing for informed decision-making and improved operational efficiency. The combination of high-performance sensors and processing capabilities enables the platform to perform tasks such as environmental monitoring, predictive maintenance, and automated control seamlessly.

Moreover, the Foster 7145 000 is designed with energy efficiency in mind. It incorporates power-saving technologies that minimize energy consumption without compromising performance. This feature is particularly beneficial for applications where power availability is limited or operational costs need to be reduced.

In conclusion, the Foster 7145 000 stands out due to its powerful processing capabilities, extensive connectivity options, rugged design, advanced sensors, and energy efficiency. These characteristics make it an excellent choice for various industries looking to leverage modern technology for enhanced performance and integration. Whether in automation, robotics, or IoT, the Foster 7145 000 is a valuable asset for any organization seeking innovation and reliability in their operations.