Dacor PF36 manual Connecting the Water Supply, Plug in Refrigerator, Materials Needed

Page 8

Installation Instructions

Connecting the Water Supply

Materials Needed:

1⁄4” outer diameter flexible copper tubing

Shut-off valve (requires a 1⁄4” hole to be drilled into water supply line before valve attachment)

Adjustable wrench

1⁄4” hex nut driver

1.Unplug the refrigerator from the electrical outlet.

2. Create service loop with copper tubing (minimum 2’ diameter). Avoid kinks in the copper tubing when bending it into a service loop. Do not use plastic tubing.

3. Remove the plastic cap from water valve inlet port.

6. Slide the brass nut over the

 

sleeve and screw it into the inlet

 

port.

1

7. Place an adjustable wrench

on the nut (1) attached it to

 

the plastic waterline. Maintain

2

position.

 

8. Using a second adjustable wrench, turn the lower nut (2) counterclockwise and fully tighten it while holding the upper nut in place. Do not overtighten.

9. Pull on the tubing to confirm the connection is secure. Connect the tubing to the frame with the water tubing clamp (C).

10. Turn on the water supply.

 

Check for leaks and correct if

C

necessary. Continue to observe

the water supply connection

 

for two to three hours prior to

 

moving the refrigerator to its permanent location. Monitor the water connection for 24 hours. Correct leaks if necessary.

Plug in Refrigerator

4. Place the brass nut (A) and

sleeve (B) on the end of the

copper tube as illustrated.

Reminder: Do not use an old

sleeve. The nut and sleeve are

provided in the use and care

packet.

B

A

WARNING

Electric Shock Hazard

Plug the refrigerator into a grounded 3-prong outlet. Do not remove ground prong.

Do not use an adapter.

Do not use and extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

5. Place the end of the copper

tubing into the water valve inlet

port. Shape the tubing slightly.

Do not kink the tubing so that it

feeds straight into the inlet port.

B

Plug the refrigerator into a

grounded three prong outlet.

A

NOTE: Allow 24 hours to

produce the first batch

 

of ice. Discard the first

 

three batches of ice

 

produced. Allow three days

 

to completely fill the ice

 

container.

6

Image 8
Contents Install ation Instructions Inch Refriger ator Francis VoirBy Dacor, all rights reserved Installation Recommendations Table of ContentsRefrigerator Safety Design Specifications Installation SpecificationsCabinet Layout Electrical RequirementsInstallation Instructions Door and Drawer Front RemovalHinge Pin Reinstalling the Drawer FrontReinstalling the Doors Materials Needed Connecting the Water SupplyPlug in Refrigerator Handle Installation Move Unit to Final PositionLeveling Properly Dispose of Your Old RefrigeratorInstallation Checklist Instructions D’install ation Réfrigér ateu r de 36 Pouces Prescriptions D’installation Instructions d’installationInstructions Importantes de Sécurité Conseils D’installationSécurité du Réfrigérateur Prescriptions ’installationCaractéristiques physiques Prescriptions D’installation Implantation de l’armoireSpécifications Électriques Conditions Requises pour L’alimentation en EauInstructions D’installation Charnière CentraleRemontage de La Façade du Tiroir Remontage de La Porte ou des PortesOutillage et Matériaux Nécessaires Raccordement de L’arrivée D’eauBranchement du Réfrigérateur Déplacement de L’appareil Jusqu’à son Emplacement Définitif Mise à niveauMontage des Poignées Mise au Rebut Correcte D’un réfrigérateur UsagéVérification de L’installation Page Page

PF36 specifications

The Dacor PF36 is a premium piece of kitchen equipment designed for both professional chefs and home culinary enthusiasts. This 36-inch wide range hood is engineered to combine powerful performance with sophisticated design. Its sleek, stainless steel exterior not only enhances the aesthetic of any kitchen but also ensures durability and easy maintenance.

One of the key features of the Dacor PF36 is its impressive ventilation capability. With a maximum airflow of up to 1,200 CFM (cubic feet per minute), it can easily handle the smoke and odors produced by high-heat cooking methods. The hood is equipped with a powerful centrifugal blower that efficiently captures grease and contaminants, ensuring a cleaner kitchen environment. Moreover, its multi-speed fan control allows users to adjust the ventilation power according to their cooking needs, providing flexibility and control.

The PF36 integrates advanced technology to enhance usability and efficiency. One notable feature is its intuitive touch control panel, which simplifies operation and allows users to effortlessly adjust fan speeds and lighting settings with just a fingertip. Additionally, the range hood is equipped with LED lighting that illuminates the cooking surface, providing better visibility while also being energy-efficient.

Another characteristic that sets the Dacor PF36 apart is its noise reduction technology. Unlike many traditional range hoods, this model is designed to operate quietly, so it won’t disrupt conversations or the ambiance of your kitchen. This is particularly beneficial in open-concept spaces where cooking and entertaining often go hand in hand.

Installation and maintenance of the PF36 are straightforward. The hood comes with a quick-release grease filter that can be easily removed and is dishwasher safe for convenient cleaning. Its adjustable chimney ensures a perfect fit for various ceiling heights, making it a versatile choice for many kitchen layouts.

In summary, the Dacor PF36 range hood is a blend of power, style, and technology. Offering impressive ventilation capability, advanced controls, and quiet operation, it stands out as an exemplary piece of kitchen equipment for anyone looking to elevate their cooking experience. Whether you're a gourmet chef or a home cook, the PF36 meets the demands of modern culinary practices while complementing your kitchen's design.