Aga Ranges 30AIM Trouble Shooting Two, Charge line, and vent line for any build or restrictions

Page 12

Trouble Shooting Two

Problem

Possible Cause

Correction

Ice cubes are too small (less than 1/2 inch

Low ice consumption.

thick).

 

Ice is slowly melting in the ice bin and will affect the size of the ice cube. This is normal operation. When the ice bin needs to be replenished, cubes will return to regular size.

Not enough water in reservoir.

Make sure that the reservoir drain plug is installed properly. Check the water line to the unit to make sure there are no restrictions or kinks in the line. Check all filters to make sure they are not restricted or plugged.

Distributor tube is restricted.

See "CLEANING YOUR ICE MACHINE" section for cleaning the unit for

 

proper operation.

Build up of deposits on evaporator plate.

See "CLEANING YOUR ICE MACHINE" section for cleaning the unit for proper operation and cube size.

 

Inadequate drain system.

Restriction in drain lines will cause ice in the bin to melt to a thinner

 

 

cube. If using a gravity drain, make certain there are no kinks or restric-

 

 

tions in the drain lines. If using a drain pump, check the inlet screen, dis-

 

 

charge line, and vent line for any build or restrictions.

 

Leaking drain valve.

See "CLEANING YOUR ICE MACHINE" section for cleaning the unit.

 

 

 

This will also dissolve and flush out foreign material in the drain valve

 

 

causing it to leak.

 

Room temperature is too warm.

Move to an area where temperature is below 90 deg. F.

 

 

 

 

 

Ice cubes are too big (greater than 3/4 inch

Ice slab not releasing.

See "CLEANING YOUR ICE MACHINE" section for cleaning the unit for

thick).

 

proper operation and cube size.

 

Condenser fan air flow is restricted.

Make certain the grille in the front of the unit is free and open for prop-

 

 

 

er air circulation. Check and clean the condenser coil by removing the

 

 

grille in the front of the unit. Clean the condenser with a vacuum and

 

 

brush attachment.

 

Room temperature is too warm.

Move to an area where temperature is below 90 deg. F.

 

 

 

 

 

Hollow ice slab.

Distributor tube is restricted.

See "CLEANING YOUR ICE MACHINE" section for cleaning the unit for

 

 

proper operation.

Build up of deposits on evaporator plate.

See "CLEANING YOUR ICE MACHINE" section for cleaning the unit for proper operation and cube size.

Low water level in reservoir.

Make sure that the reservoir drain plug is installed properly. Check the water line to the unit to make sure there are no restrictions or kinks in the line. Check all filters to make sure they are not restricted or plugged.

All specifications and product design subject to change without notice.

11

Such revisions do not entitle the buyer to corresponding changes, improvements, additions, replacements or compensation for previously purchased products.

Image 12
Contents Aga 30AIMACIM-15115V Starting Out Installation Select LocationCabinet Clearance Electrical ConnectionInstallation Drain Plumbing Drain PlumbingGravity Drain Location Water Supply Water SupplyPage Caring for Your Ice Machine OperationCare of Unit Normal Responsibilities of the OwnerCleaning Your Ice machine Switch the selector switch to the OFF positionReplace the front cover panel and close the door Things to Remember Things to RememberObtaining Service Before Calling for ServiceHow to Obtain Service For Your RecordsTroubleshooting One Trouble Shooting Two Charge line, and vent line for any build or restrictionsIce slab not releasing Trouble Shooting Three Troubleshooting Four Warranty Household Refrigeration Products Limited WarrantyBox 997 Richmond, Indiana 800.243.1624Page Aga Ranges/Refrigeration Products Division

30AIM specifications

Aga Ranges has long been a hallmark of elegant cooking, combining traditional craftsmanship with modern technology. The Aga Ranges 30AIM model exemplifies this blend perfectly, making it a standout choice for culinary enthusiasts and home chefs alike. This iconic range cooker is designed not just for cooking but also for elevating the kitchen experience through its unique features and robust construction.

One of the main features of the 30AIM is its classic cast iron cooking framework. Cast iron provides exceptional heat retention and even distribution, ensuring that dishes are cooked to perfection every time. The 30AIM incorporates several ovens, allowing multiple dishes to be cooked simultaneously at different temperatures. This flexibility is ideal for baking, roasting, and simmering, all of which can occur without the flavors mingling.

Another significant characteristic of the 30AIM is its innovative energy-saving technology. With its induction cooking module, the 30AIM offers rapid heating and precise control over the cooking process. This induction technology not only speeds up cooking times but also enhances safety, as the cooking surface remains cool to the touch, reducing the risk of burns.

The 30AIM model also features a sleek, user-friendly control panel, allowing chefs to monitor their cooking easily. The integrated timer and temperature control systems provide convenience, ensuring that meals are consistently cooked to perfection. The range is available in various colors, adding a touch of personalization to any kitchen decor.

Moreover, the 30AIM emphasizes ease of cleaning, with accessible surfaces and removable parts that simplify maintenance. The combination of high-quality materials and thoughtful design ensures that this range will remain a centerpiece of the kitchen for years to come.

In essence, the Aga Ranges 30AIM is more than just a cooking appliance; it is a true culinary companion that embodies tradition and innovation. Its combination of cast iron construction, state-of-the-art induction technology, user-friendly features, and aesthetic appeal make it an exceptional choice for those who are serious about their cooking. Whether baking, roasting, or simply entertaining guests, the Aga Ranges 30AIM is designed to enhance every cooking experience while ensuring outstanding results.