DCS CT-365GN, CT-365BL manual Installation Instructions, Preparing for the Installation

Page 13

Installation Instructions

PREPARING FOR THE INSTALLATION:

Be sure to read page 11 for the proper ventilation requirements before you begin.

When making your CUTOUT refer to page 13 on cabinet preparation.

Step 1: Unpack the unit, the regulator, and remove all packing between all the burners, rings, and caps. Remove the grates from their boxes.

Step 2: With the necessary tools and hardware ready, measure the distance from the back and sides of the countertop and cabinet to locate the position of the cooktop Cutout.

Step 3: Make your Cutout according to the dimensions given on page 13. Square the cutout to the countertop.

Step 4: Lower the cooktop into the countertop cutout, be careful not to damage the counter, inlet pipe threads, or the power cord of the cooktop.

Step 5: Square the cooktop to the cutout and install the (4) retaining brackets onto the 8 holes located at the bottom of the unit, (See Figure 1 below).

Step 6: Tighten the 4 preloaded screws which will keep the unit secured, Do Not Over-tighten (See Figure 2 detail below).

Step 7: Install the regulator with the arrow in the direction of the gas flow ( towards the cooktop) using a sealant on the pipe threads. Put burner rings and burner caps in place.

Step 8: Plug the unit into a wall outlet.

Step 9: Connect the gas line to the unit. Refer to page 14 for gas supply hookup.

Step 10: Turn ball valve to let the gas flow.

Step 11: Turn knob on burner and apply a match to the burner until the gas lights being cautious not to burn your hand or other parts of your body.When the gas is first activated, there is air present in the gas lines.The match applied to the burner makes it easier and safer to clear the air/gas mixture. Use Caution to avoid burn injury.

Step 12: Put grates in place.

FIG.1

FIG.2

12

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Dynamic Cooking Systems, Inc DCS Message To Our CustomersTable of Contents Safety Practices & Precautions Safety Practices & Precautions Safety Practices & Precautions Control Knobs Cooktop UseCooking Utensils Electronic Igniters BurnersFlame Height Burner EfficiencyBurner Grates Cleaning the Cooktop Care and MaintenanceCleaning the Burner Grates Brand NamesCleaning the Igniters Cleaning the BurnersImportant Information Proper Ventilation RequirementsPreparing for the Installation Installation InstructionsCabinet Preparation DROP-IN Cooktop CUT-OUT DimensionsGAS Hook UP Recommended Grounding Method Power RequirementsGeneral Installer Final ChecklistElectrical GAS SupplyProduct Measurement Specifications Wiring Diagram Length of Warranty WarrantyDCS will Cover DCS will not CoverHOW to Obtain Service Service

CT-365GN, CT-365BL specifications

The DCS CT-365BL and CT-365GN are two innovative offerings from DCS, designed to elevate the outdoor cooking experience with superior performance and durability. Both models boast a striking design, combining aesthetics with functionality that complements any outdoor kitchen setup.

One of the main features of the DCS CT-365BL and CT-365GN is their robust construction. Built from high-quality stainless steel, these grills are engineered to withstand the elements, ensuring longevity and resistance to rust and corrosion. The double-walled hood design not only adds to the aesthetic appeal but also helps maintain consistent cooking temperatures, enhancing the overall grilling experience.

Both models are equipped with powerful burners that deliver excellent heat output. With a total of three U-shaped burners, each providing 25,000 BTUs, these grills offer plenty of cooking power for any meal. The unique burner design promotes even heat distribution, allowing for precise cooking and browning of food. Additionally, the easy-to-use ignition system ensures reliable startups, so you can begin grilling without the hassle of traditional lighting methods.

For versatility, the DCS CT-365BL and CT-365GN include a dedicated infrared burner. This feature is perfect for high-temperature cooking, such as searing steaks to perfection or crisping vegetables. The infrared burner reaches high temperatures quickly, making it an invaluable addition for grill enthusiasts who appreciate a good sear.

Another standout characteristic is the spacious cooking area provided by the grill. With a primary cooking surface as large as 36 inches, there is ample space for grilling multiple items simultaneously. The grill grates are made from heavy-duty stainless steel, offering excellent heat retention and durability while also adding those quintessential grill marks to your food.

Both models are also designed with ease of maintenance in mind. The removable grease tray and easy-clean surfaces make post-cooking clean-up a breeze. This thoughtful design feature ensures that you can spend more time enjoying your meal and less time on cleanup.

In terms of technology, the DCS CT-365BL and CT-365GN incorporate a user-friendly control panel with precise temperature settings. This allows for meticulous temperature control, ensuring that each dish is cooked to perfection. The grill’s built-in lighting adds an extra layer of convenience, making it easy to grill even after the sun goes down.

In summary, the DCS CT-365BL and CT-365GN are feature-packed grilling solutions built for performance, durability, and ease of use. With powerful burners, ample cooking space, and thoughtful design features, these models represent a perfect blend of style and functionality for any outdoor cooking enthusiast.
Top Page Image Contents