DCS WD-30-BL manual Mounting Installation, Step

Page 7

Installation Instructions

MOUNTING INSTALLATION

The lower rear corners of the cabinet need to provide proper support to the back of the Warming Drawer and the anti-tip mounting clips. A 120 volt AC outlet should be located no further than

36 inches from the back center of the Warming Drawer. Illustrations suggest one possible bottom sup- port, but the consumer is not limited to this idea for mounting configuration.

STEP 1

The bottom rear section of the cabinet should be made of solid plywood or 2x4 and needs to be installed to hold the anti-tip mounting clips and support the weight of Warming Drawer, which is 90 lbs.

STEP 2

Use the screws provided to attach the mounting clips which must be installed for anti-tip safety to the bottom support at the back. See placement dimensions in figure below.

STEP 3

The Warming Drawer has slots on the back side where it will slide onto the anti-tip mounting clips. Plug power cord into AC outlet. See page 7.

STEP 4

Screw the front face screw into the center hole of the front face of the warming drawer to finish the installation. See page 7.

NOTE: Bottom support made of plywood or other solid wood construction capable of supporting the weight of the warming drawer.

FIG.04 STEPS 1 & 2

21 5/16"

Slide drawer

on to Anti-Tip mounting clips

mounting clips

6

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Professional Warming Drawer DCS Message To Our CustomersTable Of Contents Read and Understand These Precautions Safety Practices & PrecautionsPreheating Instructions Warming Drawer Features Specifications Installation InstructionsCutout Dimensions Step Mounting InstallationStep Wiring Diagram HOW to Obtain Service ServiceDCS will not PAY for WarrantyLength of Warranty DCS will PAY forPage CHAUFFE-PLATS Professionnel Avertissement ’intention de nos clientsTable des matières Mesures DE Securite ET DE PrecautionVeuillez Lire ET Bien Assimiler CES Consignes Mesures de sécurité et de précautionInstructions DE Prechauffage Caracteristiques DU CHAUFFE-PLATS Instructions de montage Dimensions DES DecoupesEtape Montage ET InstallationEtape Schéma De Câblage Pour Lobtention DE Service DCS NE Couvre PAS LES Frais Suivants GarantieDuree DE LA Garantie DCS Couvre LES Frais SuivantsRemarque Part No Rev a Litho in USA 4/2002

WD-30-BL specifications

The DCS WD-30-BL is an innovative and highly regarded addition to the world of high-performance cooking appliances. Known for its robust construction and professional-grade features, this 30-inch wall oven offers an impressive blend of function and style designed for discerning home chefs.

One of the standout features of the DCS WD-30-BL is its convection cooking technology. This advanced system utilizes a fan that circulates hot air throughout the oven cavity, ensuring even heat distribution. This results in perfectly cooked meals, as it helps eliminate cold spots and reduces cooking times. Whether baking pastries, roasting meats, or preparing casseroles, users can expect consistently great results.

The oven's generous interior, with a capacity of 4.1 cubic feet, allows for multiple dishes to be cooked simultaneously. The interior is also equipped with durable and easy-to-clean porcelain enamel, making post-cooking clean-up a breeze. Additionally, the DCS WD-30-BL features a self-cleaning function, offering convenience and efficiency, as it minimizes the effort needed to maintain its pristine condition.

Equipped with a powerful 25,000 BTU infrared broiler, this oven's heating capabilities are impressive. The broiler delivers intense heat for browning and crisping, perfect for achieving restaurant-quality finishes at home. The oven also includes multiple cooking modes, allowing for various culinary techniques, including traditional bake, broil, and roast.

Design-wise, the DCS WD-30-BL showcases a sleek, modern aesthetic with a professional stainless-steel finish. Its ergonomic controls are user-friendly, featuring intuitive knobs and a digital display for easy operation. The viewing window is large and equipped with triple-glazed glass, ensuring excellent heat retention and allowing users to monitor cooking progress without opening the door.

Safety features are integral to the DCS WD-30-BL, with a cooling fan that ensures the oven remains safe to touch during and after cooking. With its reliable construction and attention to detail, this wall oven meets the needs of both serious home cooks and culinary enthusiasts alike.

In summary, the DCS WD-30-BL is a sophisticated and versatile wall oven that combines professional performance with modern design. Its advanced technologies and features, from convection cooking to a powerful broiler and self-cleaning capabilities, make it a valuable addition to any kitchen.
Top Page Image Contents