Delfield ST4427N, STD4427N specifications  ST4472N,  STD4472N, Flat top with a door

ST4472N FLAT TOP

Front-Breathing Self-Contained Compact Flat Top Refrigerators

Project_ __________________________

Item_____________________________

Quantity_ _________________________

CSI Section 11400

MODELS:

 ST4472N	Three section refrigerator	 STD4472N	Three section refrigerator
	Flat top with a door	_	Flat top with drawers

	STANDARD FEATURES
	•	All 4400 and 4500 Series units are 100% front breathing,
		which allows the unit to be pushed against a wall or built into
		a cabinet or an existing line up
	•	Durable, rugged stainless steel sides, top and front
	•	Features Delfield’s exclusive ABS interior (on sides). ABS
		is extremely durable - it won’t dent, chip or corrode and is
		backed by a limited lifetime warranty
	•	Heavy duty self-closing hinges
	•	“ST” prefix models have a 4” stainless steel backsplash
	•	“D” prefix models feature Delfield’s exclusive new drawer
		system. Drawers are backed by a 10-year warranty on the
		track assembly
	•	Environmentally friendly R404A refrigerant
	•	High density foamed in place polyurethane keeps energy
		costs low
	•	Black recessed quick grip handle
	•	Standard on 2” casters for easy cleaning and installation
	•	60-cycle single phase electrical system
	•	7’ cord and plug supplied
	•	Cord spring relief - prevents cord rollover
STDST4472N	•	One epoxy coated wire shelf standard, installed per door
		section
	•	ACT solid state electronic control
	•	One year parts and 90 day labor standard warranty.

OPTIONS AND ACCESSORIES

Flat lift off cover

18” wide single tier overshelf

Stainless steel finish on back

Plastic laminate on front

Additional wire shelves

Door lock

Exterior thermometer

Interior lights

Glass door(s)

*220V/50 Hertz electrical system

*Inclusion of this option will alter electrical specifications of the unit.

ST4472N FRONT-BREATHING SELF-CONTAINED FLAT

SPECIFICATIONS

Exterior top is one-piece,22-gauge stainless steel with integral square nosing on the front.

Exterior back and bottom are two-piece24-gauge galvanized steel.

Exterior ends are stainless steel.

Interior sides of door models are thermoformed ABS plastic with integral shelves supports. Interior back is one- piece 22-gauge stainless steel. Interior bottom and top are thermoforned ABS plastic. Base is fully insulated with high-density foamed in place polyurethane.

Refrigeration system uses HFC-404A refrigerant. Compressor is 1/5 H.P., with condenser coil and condensate evaporator mounted on rear of the cabinet. Evaporator coil are located on the interior rear wall of the cabinet. Refrigerant flow is controlled by a capillary tube. Cabinet maintains an interior cabinet temperature of 36°F to 40°F (2°C to 4°C).

ACT control. ACT electronic, solid state control, mounted on the exterior rear of the cabinet, allows unit to maintain precise temperatures in heavy duty conditions.

Electrical connections are 115 volt, 60 Hertz, single phase. Unit has a 7’ (2.1m) long electrical cord and NEMA 5-15P plug.

Casters: Equipment is mounted on 2” (5.08cm) diameter front locking plate casters. 2.5” (6.35cm) ride height.

Doors have a 24-gauge stainless steel exterior, with thermoformed ABS plastic interior liner. Cabinet of door models has one adjustable epoxy-coated wire shelf.

Drawers have a 24-gauge stainless steel exterior with thermoformed ABS plastic interior liner. Drawer frames are 12-gauge stainless steel. Drawer slides are 11-gauge stainless steel with Delrin bearings. Drawer units have two drawers. Top drawer holds one 12” x 20” (30.5cm x 50.8cm x 10.1cm) and three 1/9 size 4"-6" deep pans. Bottom drawer holds one 12" x 20" and three 1/9 size 4" deep pans. Pans are supplied by others.

TOP REFRIGERATORS

980 S. Isabella Road	Phone: 800-733-8948	Approval__________________
Mt. Pleasant, MI 48858	Fax: 800-669-0619	Date_____________________
www.delfield.com	Email: info@delfield.com