Delfield |
|
|
|
| |
™ |
| ® |
|
| Project ___________________________________ |
|
|
|
| ||
|
|
|
|
| Item _____________________________________ |
|
|
|
|
| Quantity _ ________________________________ |
6000XL |
|
| CSI Section 11400 | ||
|
| Approved _ _______________________________ | |||
|
| Date _____________________________________ | |||
Glass Door |
|
|
| ||
|
|
| |||
|
|
|
|
|
|
Models |
|
|
|
|
|
• | Single section Full height doors | • | Single section Half height door | ||
• | Two section Full height doors | • | Two section Half height door | ||
• | Three section Full height doors | • | Three section Half height door | ||
• | Remote Full height doors | • | Remote Half height door | ||
• | Remote Full height doors | • | Remote Half height door | ||
• | Remote Full height doors | • | Remote Half height door |
6000XL: Glass
Standard Features
•Stainless steel front shroud
•Aluminum sides
•Seamless, Delrite® ABS interior liner
•Top mounted refrigeration system
•High performance Delflow refrigeration, designed to maintain 27˚F to 40˚F
•Easy to adjust epoxy shelves (three per section)
•Easy to read digital thermometer with visual high/low temp alarms
•10’ cord and plug attached
•Edgemount door hinges
•All doors are fully field rehingable
•Environmentally friendly R404a refrigerant
•One year parts and labor, 5 year compressor warranty, limited lifetime liner warranty
•Accepts 18” x 26” sheet pans
•Standard glass door handles
•6” adjustable legs (field installed)
•Self closing doors with stay open feature at
120˚
Options & Accessories
Extra shelves
Non standard hinging
Door Reach-in
Specifications
Exterior: Top and bottom are constructed of | Refrigeration system: All components are mounted to |
galvanized steel. Exterior sides are 0.032 aluminum. Front | the exterior cabinet ceiling, outside the food zone and are |
housing is | assembled as one piece and can be removed as one piece. |
Doors: Unit is provided with hinged glass front door(s). | Environmentally friendly R404A refrigerant is used. System |
has the capability of maintaining between 27˚F and 40˚F in | |
Doors are provided with magnetic gaskets, | heavy use food service operations. Refrigerant is metered |
edgemount hinges; and quick grip long length door handle(s). | using a highly responsive thermostatic expansion valve. |
Doors are field reversible with no drilling required. | System is controlled using Delfield’s |
Interior: Liner is constructed of seamless, one piece ABS | Technology electronic temperature control, which provides |
improved pull down times, reducing compressor cycling and | |
material with 15 molded shelf supports spaced 3.00” (7.6cm) | longer compressor life with lower energy consumption. |
apart. Three epoxy coated wire shelves, rated at 250 lb. load | Control system uses adaptive defrost to assure evaporator |
capacity each, are provided per section. Shelf supports are | |
also capable of holding two 12” x 20” pans (by others) or one | coil is free of ice and operating at optimum efficiency. |
18” x 26” pan (by others) per level. Liner comes with a limited | Evaporator condensate is eliminated using an energy efficient |
lifetime warranty. | hot gas system. |
Units are completely insulated with a minimum of 2.00” | Others: Unit is supplied standard with a 10’ cord and plug, |
(5.08cm) high density foamed in place polyurethane. | attached. |
Interior is lit by one | Units are standard with legs. Legs are constructed of painted |
models, one | metal and are 6” high with 1” adjustability to compensate |
and three | for installation location factors. Shipped loose for field |
Lights are located outside of the food zone. Fluorescent | installation. |
lights are operated with a manual on/off switch. |
|
Refrigerator
980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858
Phone:
Fax:
www.delfield.com