Delfield 402 specifications Optional accessories & modifications

PROJECT
ITEM #
QUANTITY	DATE
APPROVAL

402

Self-contained compact work top refrigerators

Short form specifications

Exterior top shall be one-piece, 22-gauge stainless steel with front edge turned down to form nosing and rear edge turned up to form a 2" (5.1 cm) thick by 4" (10.2 cm) high backsplash.

Exterior back and bottom shall be one-piece 24-gauge galvanized metal. Exterior

	ends shall be 22-gauge stainless steel.
	Base interior shall be one-piece thermoformed ABS plastic material, with integral
	shelf supports. Base shall be fully insulated with high-density foamed-in-place poly-
	urethane.
	Doors shall have a 22-gauge stainless steel exterior, with a thermoformed ABS plas-
	tic interior liner, and shall be fully insulated with foamed-in-place polyurethane. Door
	handles shall be black, recessed and shall extend the full length of the top of the door.
	Cabinet shall have (2) adjustable epoxy-coated wire shelves installed.
	Refrigeration system shall use HFC-404A refrigerant. Compressor shall be å h.p.,
	with condenser coil and hot gas condensate evaporator mounted on rear of cabinet.
	Evaporator coil and temperature control shall be mounted on the interior rear wall
	of the cabinet. Refrigerant flow shall be controlled by a capillary tube. Cabinet shall
	maintain 36°F to 40°F (2°C to 4°C) interior cabinet temperature.
	Electrical connections shall be 115 volt, 60 Hertz, single phase. Unit shall have a 7'
	(2.1 m) long electrical cord and NEMA 5-15P plug. Cord and plug shall be located on
	rear of cabinet, centered left to right, 16" (40.6 cm) above floor.
	Equipment shall be mounted on 6" (15.2 cm) high metal legs with black enamel
	finish.
Model 402	Optional accessories & modifications
	Stainless steel back
	Plastic laminate on front
	Additional wire shelves
	Stainless steel single-tier overshelf
	3.5" (8.9 cm) diameter casters
	5" (12.7 cm) diameter casters
	Door lock
	Full-size composite-type cutting top
	220 volt, 50 Hertz electrical system

®

The Delfield Company, 980 S. Isabella Rd., Mt. Pleasant, MI 48858, U.S.A. • (800) 733-8821 • Fax (800) 669-0619 • www.delfield.com

Delfield reserves the right to make changes in design or specifications without prior notice. ©2002 The Delfield Company. All rights reserved. Printed in U.S.A.