Dacor 65537 manual Starting Your Dishwasher, Adding a Dish After You Start

Operating Your Dishwasher

Starting Your Dishwasher

IMPORTANT: See the Getting to Know Your Dishwasher section for a description of the various wash settings.

START	NORMAL	HEAVY	CRYSTAL	RINSE	DELAY	SANI	CANCEL	SECURE
STOP						RINSE

SANITIZED WASHING

RINSE AID	RINSING
FLOOR GUARD	DRYING

DIAGNOSTIC CLEAN

To wash or rinse the dishes:

1.Press one of the wash cycle buttons or the rinse button on the control panel:

2.Press START/STOP. The numeric display will show the length of the cycle in minutes.

3.Close the door.

NORMAL HEAVY CRYSTAL RINSE

START

STOP

4.Push on the door handle to make sure that the door is completely shut. After a brief pause, the dishwasher will start.

When the wash or rinse cycle is completed, the dishwasher will make 3 short beeps.

Adding a Dish After You Start

You can add a dish, if needed, after starting your dishwasher. Dacor recommends that you only add items during the first 5 minutes of operation to make sure they get clean.

To add a dish:

1.Open the door. The dishwasher will stop operating.

2.Wait a moment for the steam to clear.

3.Without touching any of the hot surfaces or racks, insert the item into one of the racks, following normal loading instructions.

4.Close the door.

5.Push on the door handle to make sure that the door is completely shut. After a short pause, operation will resume.

Stopping Your Dishwasher During Operation

CANCEL

To stop the current cycle and drain your dishwasher:

1.Open the door. The dishwasher will stop operating.

2.Press CANCEL.

CANCEL

3.Close the door. After a short pause, you will hear the water in the dishwasher begin to drain. Once the water is drained, the dishwasher will stop.

IMPORTANT: If you press the CANCEL button twice, the dishwasher will stop completely. The water inside the dishwasher will not drain.

16 Dishwasher