Installing the Oven in the Cabinet

Installation Instructions

warning

•Failure to properly install the mounting screws may result in movement or tipping of the oven during use resulting in personal injury.

•Do not block the oven air exhaust located at the bot- tom of the oven. Blocking the intake may result in a fire hazard, cabinet damage or poor performance.

•The wall oven is heavy. Do not attempt to install it in the cabinet with less than two people.

1.Lift the wall oven up to the cabinet cut out, using the upper edge of the cavity opening and the bottom of the oven case side as gripping points. Be certain to take all necessary safety precautions due to the weight of the appliance.

Gripping

point

Gripping point:

case bottom

both sides

2.Resting the oven on the cabinet-mounting platform, slide the oven into the recessed area until the rear edge of the oven frame is flush with the cabinet face and the oven is centered within the cut out. Ensure that the electrical conduit slides through the opening in the cabinet platform or coils above the oven chassis as the oven is slid into place. The cable must be placed into the recessed area located along the rear vertical edge of the oven or coiled above the oven chassis. Do not trap the appliance cable between the oven case back and the rear wall.

3.Locate the mounting holes in the trim on both sides of the oven. There are four (4) holes, two (2) on each side, for single oven models and six (6) holes for dou- ble oven models.

4.Use a 1/16” drill bit to drill pilot holes in the cabinet through all of the trim mounting holes.

5.Install all of the provided #6 screws through the oven trim into the cabinet to secure the oven. Do not over- tighten the screws.

Mounting Screws:

Four (4) for single oven

Six (6) for double oven

MOR, EOR specifications

Dacor EOR and MOR are innovative solutions tailored for energy optimization and resource management in various industrial and commercial applications. These systems represent the forefront of modern technology, combining advanced features and methods to improve efficiency and sustainability.

The main feature of Dacor EOR (Energy Optimization Resource) is its ability to monitor and manage energy consumption in real-time. It employs sophisticated algorithms to analyze energy usage patterns, identify inefficiencies, and suggest adjustments that can lead to significant cost savings. By integrating AI and machine learning, the EOR system learns from historical data, allowing for progressive enhancements in energy management.

On the other hand, the Dacor MOR (Management of Resources) focuses on optimizing the use of natural resources, including water and raw materials. MOR employs a comprehensive approach, utilizing sensors and IoT (Internet of Things) technology to gather data on resource consumption. This data can be analyzed to provide insights into usage trends, enabling businesses to implement strategies that minimize waste and promote sustainability.

One of the standout technologies used in both EOR and MOR systems is the integration of predictive analytics. By forecasting energy and resource needs based on various variables such as time of year, production schedules, and weather patterns, these solutions can proactively manage resources before shortages or overages occur. This feature not only enhances operational efficiency but also supports environmental responsibility by reducing unnecessary consumption.

The Dacor solutions are also characterized by their user-friendly interfaces. Through intuitive dashboards, users can easily access real-time data, receive alerts, and analyze trends. This accessibility fosters a culture of accountability within organizations, encouraging all employees to engage in energy and resource conservation efforts.

Moreover, Dacor EOR and MOR systems are designed to be scalable, accommodating the needs of businesses of all sizes. Whether it's a small enterprise or a large corporation, the adaptability of these systems allows for tailored implementations that fit specific operational requirements.

In summary, Dacor EOR and MOR are at the cutting edge of energy and resource management technology. With their advanced monitoring capabilities, predictive analytics, and user-friendly design, they not only help businesses optimize their consumption but also contribute to a more sustainable future by reducing environmental impact and promoting efficient resource use. These solutions stand as essential tools for modern enterprises aiming to enhance their operational efficiency while aligning with sustainability goals.