Dacor MO manual Install the Oven in the Cabinet, Door Gripping Points

Page 15

Installation Instructions

3.Raise the door so that it is at a 15° angle from the front of the oven. Hold the door with one hand on each side. Lift the door up and out.

Door Gripping

Points

Install the Oven in the Cabinet

warning

•Use an appliance dolly to move the appliance when installing it or removing it from the wall for service. Use of an appliance dolly will minimize the risk of personal injury as a result of the oven tipping.

•Failure to install the mounting screws may result in movement or tipping of the oven during use, or per- sonal injury.

•Do not block the oven air exhaust and intake located at the bottom of the oven door(s). Blocking the air- flow may cause cabinet damage and poor baking performance.

2.Support the oven at all times until it is secured into the cabinet. Be certain to take all necessary safety precau- tions.

3.Resting the oven on the cabinet support platform, slide the oven into the recessed area until the rear edge of the oven trim post is flush with the cabinet face and the oven is centered within the cutout. Ensure that the electrical conduit slides through the opening in the cabinet platform or coils above the oven chassis as the oven is slid into place. Do not trap the appliance cable between the oven case back and the rear wall.

4.Make sure the oven is resting level. Shim it if neces- sary.

warning

When installing the mounting screws into composite cabinets, install them into the sides of the cabinet only. Mounting screws installed into the front of composite cabinets will have a tendency to pull loose.

5.Find the mounting hole locations in the front and side of the oven trim posts. Drill 1/16” pilot holes in the cabi- net through the front or side of the trim posts. Single oven models require four (4) holes, while double oven models require six (6).

6.Install the #6 x 3/4” screws provided in the instructions envelope. Do not over-tighten.

important

An oven that is not level may provide poor or inconsistent baking results.

1.Lift the oven up to the cabinet cutout using the handles and gripping points shown. Use extreme caution when lifting the appliance, because it is heavy.

Trim Post

Gripping Point

Gripping Point

Handle

Trim Post

Gripping Point

13

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Installation Instructions Discovery Wall Oven Dacor, all rights reserved Table of Contents Important Safety InstructionsBefore You Begin General Safety Precautions Model Identification Customer Service InformationIf You Need Help Appliance Data PlateProduct Specifications Product DimensionsModel Number Double Wall Oven Dimension Single Wall Oven DimensionSingle Wall Planning the InstallationSelecting the Location Cabinet Cut-OutDuel Single Wall Oven Cutout Single Wall Oven Under Counter CutoutUnder Counter Cutout Support Platform Model Type Dedicated Circuit Total Required Connected Load Installation InstructionsElectrical Specifications Parts ListElectrical Service Installation Connecting to a Four Wire Electrical SystemWire Junction Box Connection RED Green White Black Remove the oven doors Final InstallationDoor Gripping Points Install the Oven in the CabinetInstall Exhaust Deflector Reinstall the Oven DoorsVerify Proper Operation Installation Checklist Page

MO specifications

Dacor MO is a standout appliance designed to cater to modern culinary needs with an array of high-end features and cutting-edge technology. Combining style, functionality, and innovation, the Dacor MO has positioned itself as a premium microwave option for both home chefs and professionals alike.

One of the key features of the Dacor MO is its sleek design, which seamlessly integrates into any kitchen décor. Available in various finishes, including stainless steel and custom panel options, the microwave not only provides efficient cooking capabilities but also enhances the overall aesthetics of the kitchen space.

The Dacor MO is equipped with a powerful microwave generator that delivers rapid and even heating. With multiple power levels, users can easily adjust cooking intensity based on their culinary requirements. A spacious interior allows for the accommodation of large dishes, enabling users to prepare family-sized meals with ease.

Another significant highlight of the Dacor MO is its advanced sensor cooking technology. This innovation automatically adjusts cooking time and power based on the specific food being warmed or cooked, ensuring optimal results every time. This feature alleviates the common concerns of overcooking or undercooking, allowing users to focus on other meal prep tasks without constant monitoring.

In addition, the Dacor MO boasts a variety of pre-programmed cooking modes tailored for different food types. From popcorn to baked goods, these presets simplify meal preparation and guarantee consistent results. The intuitive control panel is user-friendly, allowing for quick programming and adjustments, even for those less familiar with technical appliances.

The convenience of the Dacor MO extends beyond just cooking. It includes a robust cleaning system that helps maintain its appearance and functionality. The microwave’s interior is designed for easy cleaning, reducing the time and effort needed to keep the appliance in top condition.

Dacor also emphasizes sustainability in its product designs. The MO is an energy-efficient appliance that consumes minimal power while delivering high performance, reinforcing the brand's commitment to environmentally friendly practices.

In summary, the Dacor MO microwave is a sophisticated appliance that offers a blend of luxury, performance, and convenience. Its advanced features, including powerful cooking capabilities, sensor technology, user-friendly controls, and stylish design, make it a top choice for those who seek excellence in their kitchen equipment. Whether for reheating leftovers or preparing gourmet dishes, the Dacor MO stands out as a versatile tool for culinary enthusiasts.
Top Page Image Contents