Care and Cleaning

Befor carrying out any cleaning and maintenance to your appliance you must disconnect it from the power supply.

Inside the oven

We recommend you clean your oven each time you use it, especially after cooking roasts. In fact, it is advisable to prevent food residue from building up during cooking: the residue would be re-cooked each time the oven is used and would char and release smoke and unpleasant odours.

Oven exterior

Clean the enamelled or stainless steel exterior surfaces of your oven using a sponge soaked in soapy water, making sure you rinse and dry these thoroughly, without using abra- sive or corrosive products which could damage them.

Stainless steel

Rinse stainless steel parts and dry them thoroughly using a soft cloth. Use a specific non-abrasive product to remove tougher stains,

DO NOT use aluminium foil to line the bottom of the oven.

To avoid having to clean the bottom of the oven, you may be tempted to line it with some aluminium foil. We strongly advise against this. The aluminium foil sheet in direct contact with the heated enamel coating could melt and damage the enamel coating inside the oven irreversibly.

Cleaning the rotisserie and other accessories

The rotisserie can be removed completely thanks to the 2 wing nuts.The elements comprising the rotisserie assembly should be cleaned together with the other accessories (dripping pan, grid) in the sink using a damp sponge and ordinary detergent or even in your dishwasher.

Rubber Seal

There is a rubber seal surrounding the oven opening which guarantees its perfect functioning. Check the condition of this seal on a regular basis. If necessary, clean it using warm water and dry thoroughly.

DO NOT use abrasive products or objects to do so. Should the seal become damaged, please contact Hotpoint Service (see KEY CONTACTS, back page). We recommend you avoid using the oven until it has been repaired.

Disassembling the oven door

The oven door can easily be removed to clean the space between the bottom of the door and the front of the oven.To disassemble the door, proceed as follows:

-open the oven door fully,

-lift up and turn the small levers situated on the two hinges,

-shut the door, but not completely,

-grip the door on the two external sides and pull it towards you, pulling it out of its seat.

Reassemble the door by following the above procedures in reverse order.

Replacing the Oven Lamp

•Disconnect the oven from the power supply by means of the omnipolar switch used to connect the appliance to the electrical mains; or unplug the appliance if the plug is accessible.

•Remove the glass cover of the lamp-holder;

•Remove the lamp and replace with a lamp resistant to high temperatures (300°C) with the following charac- teristics:

-Voltage: 230/240 V

-Wattage 25W

-Type E14

•Replace the glass cover and reconnect the oven to the power supply.

S077EE specifications

The Creda S077EE is a remarkable electric storage heater designed to offer efficient heating solutions for both residential and commercial applications. This model is tailored to meet the needs of modern living, providing excellent energy efficiency while maintaining user comfort.

One of the standout features of the Creda S077EE is its advanced thermal technology. This unit utilizes high-quality ceramic bricks that heat up during off-peak electricity hours. Once heated, these bricks retain warmth and gradually release it throughout the day, ensuring that your space remains comfortable without the need for constant energy consumption. This capability not only supports energy savings but also reduces environmental impact by taking advantage of lower tariff rates.

The Creda S077EE is designed with a user-friendly interface that allows for easy temperature regulation. It includes a simple control panel, featuring a dial for adjusting the heat output and a built-in thermostat that ensures the ideal temperature is maintained. Users can easily schedule heating periods, giving them complete control over their heating needs, which is particularly beneficial during the colder months.

Safety is another significant aspect of the Creda S077EE. The unit is designed with multiple safety features, including overheat protection, ensuring that it operates safely even during prolonged use. Furthermore, its compact and unobtrusive design allows it to integrate seamlessly into various room sizes and decor styles, making it an aesthetically pleasing addition to any space.

With a nominal output of 1.7 kW and a total storage capacity of 2000 watts, the Creda S077EE efficiently warms spaces up to approximately 11 square meters, making it ideal for small living areas, bedrooms, or offices. Its lightweight construction also makes installation simple and hassle-free.

In terms of build quality, Creda is known for its robust manufacturing standards, and the S077EE is no exception. It features a durable exterior that is both stylish and practical, designed to withstand the test of time. Additionally, the energy efficiency of the S077EE is reflected in its low running costs, aligning well with the growing demand for sustainable heating solutions.

Overall, the Creda S077EE electric storage heater combines efficiency, user friendliness, and safety, making it a top choice for those looking to enjoy reliable, long-lasting warmth without excessive energy costs.