Creda X152E manual Doors Ovens Oven Liners

Page 23

Care and Cleaning

Doors

Ovens

Oven Liners

Oven Lamp Replacement

Wipe over the outer door glass panels with a cloth wrung out in hot soapy water, then after wiping with a cloth wrung out in clear water, dry with a soft clean cloth. Ensure that glass doors are not subjected to any sharp mechanical blows.

Glass Inner Door Panel (where fitted) – open the door fully and unscrew the two screws securing the glass panel, taking care not to allow the glass to fall. The glass panel may now be washed at the sink. Stubborn stains can be removed by using a fine steel wool soap pad. Ensure the glass panel is not subjected to any sharp mechanical blows. Take particular care not to damage the inner surface which is coated with a heat reflective layer. After cleaning, rinse and dry with a soft cloth. For slight soiling the inner glass panel may be cleaned, while still warm, without removing it from the door.

Warning: Oven must not be operated with inner door glass removed.

Take care during cleaning not to damage or distort the door seals. Do not lift the door seal from the oven chassis, if necessary remove the seal by carefully unhooking the corner clips.

Take care that the rating label edges are not lifted during cleaning, and furthermore that the lettering is not blurred or removed.

Remove the rod shelves and meat pan.

Use a fine steel wool soap pad to remove stubborn stains from the rod shelves, meat pan and the floor of the oven.

The surface of the ‘Credaclean’ oven liners are treated on the mottled face with a special vitreous enamel which absorbs cooking soils. At temperatures of 220oC (425oF) or above, the special surface enables these soils to be slowly destroyed. The higher the temperature the more effective it is. In most cases normal cooking operation at this temperature will permit this cleaning operation to proceed during cooking. However if higher cooking temperatures are not used regularly it may be necessary, to prevent heavy soiling, to run the oven without a meat pan at maximum setting for a couple of hours. This may be necessary once a month or once every two or three months depending on the type and amount of oven cooking.

It should not normally be necessary to clean the ‘Credaclean’ panels in water. If desirable remove the rod shelves and the side panels and wash them in warm soapy water, followed by rinsing in clean water.

Open the oven door and remove the rod shelves. Using a suitable cloth to protect the fingers grip the light glass dome, unscrew anti-clockwise and lift. Reach into the aperture with fingers, and unscrew the lamp anti- clockwise. Fit replacement lamp (15W 300°C rated SES), refit dome.

Warning: Disconnect the appliance from the electrical supply before replacing the oven lamp.

23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents X152E Installation & User Instructions Creda Answer Centre 08701 54 64 Creda Answer Centre 08701 54 64Contents 89/336/EEC 73/23/EEC 92/31/EEC 93/68/EEC IntroductionDisposal of your product Siting the Cooker InstallationMoving the Cooker Splash Panel Kit Wall Mounted Always Safety InformationExtinguisher is likely to tip the pan over Safety Information NeverEvent of a chip pan fire or any other pan fire Features X152E Control Panel Hotplates General Information Notes Always place pans Centrally on Hotplate But essentially FlatOven Temperature Conversion ChartConvection Fan Never line grill pan with foil GrillingGrill Pan Handle Fixing the Grill Pan Handle RecessGrill Compartment as a ‘Hotcupboard’ You may need to use oven gloves when removing warmed itemsFillets Food Grill Setting Approximate Cooking timeGuide to Grilling WholeOven Temperature Charts Meat Food Oven Temperature Charts BakingTime TemperatureMain Oven Cookery Notes Oven PositionsPoultry For MEAT/POULTRY UP to 2kg 4lb in WEIGHT, and IT isTo prepare meat and poultry for roasting in your fan oven Frozen MeatA hot oven Using the Main Oven for Other FunctionsGrill Control Panel Decorative Trims Care and CleaningDoors Ovens Oven Liners Oven Baking Problem Check GrillingCooking Results Not Satisfactory? Something Wrong with your Cooker? Page Page For further product information 08701 54 64 Key Contacts

X152E specifications

The Creda X152E is a highly regarded electric storage heater that combines efficiency, modern technology, and user-friendly design to meet the heating needs of contemporary homes. With a focus on convenience, the X152E is equipped with an array of features that enhance its performance and usability.

One of the standout characteristics of the Creda X152E is its storage capability. The heater utilizes a brick or ceramic core to store heat generated during off-peak electricity hours, ensuring warmth is released consistently throughout the day. This makes it an energy-efficient choice for those who prefer to optimize their electricity use and manage costs effectively.

Another key feature is its programmable timer, which allows users to set specific heating schedules according to individual lifestyles. This flexibility means that the heater warms up spaces only when needed, reducing unnecessary energy consumption. The timer can be easily adjusted via a simple interface, making it accessible for all users.

The X152E also incorporates advanced insulation technology, which minimizes heat loss. The design ensures that once the heater has stored energy, it retains it for maximum efficiency. Additionally, the front air vent can be adjusted based on user preferences, allowing for tailored heating distribution and enhancing comfort levels within the room.

In terms of safety, the Creda X152E is designed with several protective features. A thermal cut-out prevents overheating, while the heater's casing is constructed from flame-retardant materials. This attention to safety is critical, particularly in homes with children or pets.

As for aesthetics, the Creda X152E boasts a sleek and contemporary appearance that allows it to blend seamlessly into various interior designs. Available in different sizes, it accommodates a range of room dimensions while providing an unobtrusive heating solution.

Additional features include a user-friendly digital display for easy monitoring of temperature settings and programming tasks. The unit is also quick and simple to install, requiring minimal maintenance over its lifespan.

Overall, the Creda X152E stands out in the market for its efficient heating capabilities, thoughtful design, and user-centric features. Whether in a small apartment or a larger family home, this electric storage heater delivers warmth, comfort, and convenience, making it a valuable addition to any space.
Top Page Image Contents