Daewoo 181GOA0A manual Installation, Leave space behind and side

Page 9

INSTALLATION

1. Steady, flat location.

This microwave oven should be set on a steady, flat surface.

2. Leave space behind and side.

All air vents should be kept a clearance. If all vents are covered during operation, the oven may be overheated and, eventually, cause oven failure.

3. Away from radio, and TV sets

Poor television reception and radio interference may result if the oven is located close to a TV, radio, antenna, or feeder and so on. Position the oven as far from them as possible.

4. Away from heating appliances and water taps

Keep the oven away from hot air, steam or splash when choosing a place to position it, or the insulation might be adversely affected and breakdowns occur.

5. Power supply

Check your local power source.

This microwave oven requires a current of approximately 3 amperes, 120Volts, 60Hz grounded outlet.

1.A short power-supply cord is provided to reduce the risks resulting from becoming entangled in or trippping over a longer cord.

2.Longer cord sets or extension cords are available and may be used if care is exercised in their use.

3.If a long cord or extension cord is used:

1)The marked electrical rating of the cord set or extension cord should be at least as great as the electrical rating of the appliance.

2)The extension cord must be a grounding type 3-wire cord.

3)The longer cord should be arranged so that it will not drape over the counter top or tabletop where it can be pulled on by children or tripped over unintentionally.

6. Examine the oven after unpacking for any damage such as:

A misaligned door, broken door or a dent in cavity.

If any of the above are visible, DO NOT INSTALL, and notify dealer immediately.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Microwave Oven Table of Contents For Safe Service Procedures Safety and PrecautionsFor Safe Operation Microwave RadiationSpecifications External View Outer DimensionSafety Interlock System Control Panel Glass Cooking Tray Feature DiagramDoor Seal Door HookKOR-180A0A Stop KOR-181G0ALeave space behind and side InstallationOperations and Functions Wattage output chartDisassembly and Assembly To remove cabinet To remove door assemblyREF no Part Code Part Name Description Remark To remove door partsPage Button Door Open To remove control panel partsTo remove high voltage capacitor High voltage circuit wiring To remove magnetronTo remove H.V.transformer To remove wind guide assemblyPrimary interlock switch Interlock Mechanism and AdjustmentCondition Trouble Shooting GuideCheck Result CauseCondition Check Result Cause Remedy CheckRelay RY1 With wires removedCause Remedy Measurement of the Microwave Power Output ProcedureMeasurement and Test Microwave Radiation Test High voltage transformer Component Test ProcedureWiring Diagram Printed Circuit Board Circuit Check ProcedureCheck Point Remark Measure Point Wave Form Remedy RemarkMesure point GND Point StateCheck no Hethod Remedy Point Wave FormPCB Circuit Diagram C.B. Location no Name Symbol Specification Part Code Door Assembly Exploded View and Parts ListControl Panel Assembly Total AssemblyPart Code Part Name Description ’TY Lamp Lock POM BlackScrew Tapping T2S PAN 4X6 Mfzn Motor SyncroNO. R180A0A002

181GOA0A specifications

The Daewoo 181GOA0A is a compact and versatile mini excavator designed to provide optimum performance in a range of construction and landscaping applications. Known for its robust build quality and reliability, the 181GOA0A is an excellent choice for both professional contractors and DIY enthusiasts.

One of the standout features of the Daewoo 181GOA0A is its powerful engine. The excavator is equipped with a highly efficient diesel engine that offers a balanced blend of power and fuel efficiency. This engine enables operators to tackle challenging terrains and heavy workloads with ease, ensuring productivity remains high throughout the day.

The excavator boasts a compact size, making it particularly useful for projects in confined spaces, such as urban job sites or residential landscaping tasks. The reduced width and height allow the 181GOA0A to maneuver easily in tight areas where larger machines would struggle. This maneuverability does not compromise on performance, as the machine retains a high lifting capacity and digging depth that competes with larger excavators in its class.

In terms of technology, the Daewoo 181GOA0A features advanced hydraulic systems that ensure precise control and superior performance. The excavator is equipped with adjustable flow rates for different attachments, enhancing versatility and allowing operators to switch between tasks seamlessly. This hydraulic system also contributes to the machine's overall efficiency by maximizing power delivery to the hydraulic attachments.

Additionally, the 181GOA0A includes an ergonomic operator's cabin with intuitive controls, providing comfort and reducing operator fatigue. The cabin is designed with visibility in mind, enhancing safety during excavation tasks. Features like adjustable seating, climate control, and easy-to-reach controls make the operator’s experience more pleasant and productive.

The build quality of the 181GOA0A showcases Daewoo's commitment to durability. Engineered with high-grade materials, the excavator is built to withstand the rigors of tough job sites while requiring minimal maintenance.

In summary, the Daewoo 181GOA0A stands out as a premier choice for those needing a compact yet powerful mini excavator. The combination of its powerful engine, advanced hydraulic technology, maneuverability, and operator comfort makes it an invaluable tool for a multitude of construction and landscaping applications. Whether you are digging trenches, moving earth, or performing other excavation tasks, the 181GOA0A delivers exceptional performance and reliability.
Top Page Image Contents