Daewoo KOR-810P manual Features Diagram, Operation Procedure, Oven cavity

When the oven door is opened, the turns off.

FEATURES DIAGRAM

1 2 3 4 5

Stage		Defrost	Auto
1	2	Weight Time	Start

OPERATION PROCEDURE

This section includes useful information about oven operation.

1.Plug power supply cord into a 230V 50Hz power outlet.

2.After placing the food in a suitable container, open the oven door and put it on the glass tray. The glass tray must always be in place during cooking.

3.Shut the door. Make sure that it is firmly closed.

	Menu		AUTO COOK	e
				r
		Clock/Timer		t
	10	1	10
	High M-High Med M-Low Low
	Stop/Clear		Start	i
				y
				p
9	7 6

q

Lock No Cups g

	AUTO COOK
Menu	1. Baked Potato

2.Fresh Vegetable

3.Soup

Weight		4. Fish Filets	o
		5. Meat Loaf
			u
			d
Auto	Clock/		s
			w
defrost	A.start	Speedy
	Clock/Timer
1 HOUR	10 MIN	1 MIN
10	1	10	0

1

2 The oven door can be opened at any time during operation by touching the door release button on the control panel. The oven will automatically shut off. To restart the oven, close the door and then touch START.

3 Each time a pad is touched, a BEEP will sound to acknowledge the touch.

6 Time clock returns to the present time when the cooking time ends.

7 When the STOP/CLEAR pad is touched during the oven operation, the oven stops cooking and all information retained. To erase all information (except the present time), touch the STOP/CLEAR pad once more. If the oven door is opened during the oven operation, all information is retained.

	min	min	sec
8	1000g	100g	10g
	High M-High	Med	M-Low Low	a
f	Stop/Clear		Start	g

4 The oven automatically cook on full power unless set to a lower power level.

5 The display will show ":0" when the oven is plugged in.

8 If the START pad is touched and the oven does not operate, check the area between the door and door seal for obstructions and make sure the door is closed securely. The oven will not start cooking until the door is completely closed or the program has been reset.

1Door latch-When the door is closed it will automatically lock shut. If the door is opened while the oven is operating.

The magnetron will automatically shut off.

2Door seal-The door seal maintains the microwaves within the oven cavity and prevents microwave leakage.

3Oven cavity.

4Spatter shield-Protects the microwave outlet from splashes of cooked foods.

5Safety interlock system-Prevents the oven from operating while the door is opened.

6Door release button-Pushing this button stops oven operation and opens the door.

7Glass cooking tray-Made of special heat resistant glass. The tray must always be in proper position before operating. Do not cook food directly on the tray.

8Roller guide-Supports the glass cooking tray.

9Door screen-Allows viewing of food. The screen is designed so that light can pass through, but not the microwaves.

0Time set pad-Used to set the cooking time and the present time.

qDisplay-Cooking time, power level, present time are displayed.

wSpeedy cook-Touch to set any desired reheat setting.

eMenu-Used to select foods.

rWeight-Used to select quantity of foods.

tDinner plate-Used to reheat dinner plate.

yBeverage-Used to reheat beverage.

uFrozen pizza-Used to reheat frozen pizza.

iMore-Used to add on one touch cooking.

oLess-Used to remove one touch cooking.

pAuto defrost-Used to defrost foods.

aPower set pad-Used to set power level.

sClock/A.start-Used to set clock & Used to set auto start.

dFeeding bottle-Used to sterilize bottle.

fStop/Clear-Used to stop the oven operation or to delete the cooking data.

gStart-Used to start a selected operation.

Make sure the oven is properly installed and plugged into the electrical outlet.

Wattage output chart

•The power-level is set by pressing the POWER pad. The chart shows the display, the power level and the percentage of power.

Touch Power pad	Power Level (Display)	Approximate Percentage
		of Power
HIGH	P-HI	100%
M-HI	P-80	80%
MED	P-60	60%
M-LOW	P-40	40%
LOW	P-20	20%

5 6