Daewoo KOR-860A manual Controls, Setting the Clock, Time Defrosting

CONTROLS

SETTING THE CLOCK

When the oven is first plugged in, the display will flash “ :0” and a tone will sound. If the AC power ever goes off, the display shows “ :0” when the power comes back on.

CLOCK

1.Touch CLOCK pad.

This is a 12 hour clock system.

2.Touch CLOCK pad once more. This is a 24 hour clock system.

NOTE : This oven has multiple clock systems. If you want 12 hour clock system, omit this step.

3. Enter the correct time of day by touching the time set pads.

4. Touch CLOCK pad.	The display stops blinking, and the colon
	starts blinking. If you selected 12 hour clock
	system, this digital clock allows you to set
	from 1:00 to 12:59. If you selected 24 hour
	clock system, this digital clock allows you to
	set from 0:00 to 23:59.

NOTE: If you attempt to enter an incorrect time, the time will not be set and a error signal tone will sound. Touch the CLOCK pad and re-enter the time

TIME DEFROSTING

When TIME DEFROST is selected, the automatic cycle divides the defrosting time into periods of alternating defrost and stand times by cycling on and off.

1. Touch DEFROST pad.

DEFROST

2.Touch the time set pads for the desired time.

3.Touch START pad.

The DEF indicator lights and " : 0" is displayed.

The display will show what you touched.

NOTE: Your oven can be programmed for 59 minutes 90 second.(59:90)

When you touch START pad, the DEF indicator starts blinking to show the oven is in the DEFROST mode. The display counts down the time to show you how much defrosting time is left in the DEFROST mode. The oven beeps during the defrosting cycle to signal that the food needs to be turned or rearranged. When the defrosting time ends, you will hear 3 beeps.

8