DOOR REMOVAL / REVERSAL INSTRUCTIONS
REMOVING STAINLESS STEEL DOORS AND HANDLES
CAUTION
Use care when using tools near surface of stainless steel doors to avoid scratching.
To Remove Doors
Stainless steel doors are not reversible. Follow these steps to remove doors.
1.Remove toe grille and top hinge cover.
2.Remove top hinge and lift freezer door off of center hinge pin. Set door aside.
3.Unscrew center hinge bin using adjustable wrench and save for reassembly. Ensure plastic washer stays on hinge pin.
4.Lift refrigerator door off of bottom hinge and set aside.
5.Remove center hinge
and shim by removing inside screw and loosening two outside screws enough to allow hinge to slide out.
6.Remove bottom hinge.
Reinsert two outside screws in holes and tighten.
7.Reverse steps 1 - 6 to
reinstall doors | Typical Handle |
To Remove Handles
1.Firmly hold freezer handle while loosening set screws with 3/32” allen wrench. Remove freezer handle.
2.Repeat step 1 for refrigerator door.
FEATURES AT A GLANCE
Ice Tray | Freezer Light |
Ice Maker |
|
Ice Bucket |
|
Freezer Shelf |
|
Freezer |
|
Control |
|
Refrigerator |
|
Control |
|
Deli Drawer |
|
Cover |
|
Deli Drawer |
|
Half Shelf |
|
Wine Rack |
|
Full Shelf |
|
Special Item Rack |
|
Mid Level Light |
|
Crisper Cover |
|
Crisper |
|
Drawers |
|
Toe Grille
Features may vary according to model
9
Fixed Door Bin
Door Rack
Dairy Door
Tall Bottle
Retainer
Snugger
Door Bin
Fixed Door Bin
Door Rack