Danby DCR122BLDD Operating Instructions, Care and Maintenance, Temperature Selection, Defrosting

Page 6

OPERATING INSTRUCTIONS

To avoid vibration, the unit must be set level. This is accomplished by adjusting the (1) front leveling leg located under the refrigerator. The temperature of the refrigerator is controlled by setting the thermostat knob to a desired setting.

TEMPERATURE SELECTION

To start the refrigerator, turn the temperature control knob to the position corresponding to the desired cooling (on the graduated blue dial) in Fig. A. The refrigerator temperature will vary depending on the quantity of the food stored, and on the frequency with which the door is opened.

To turn the control to the “OFF” position, rotate the control knob to the “0” setting. After defrosting and if the refrigerator has been left out of use for some time, set the control to maximum for 2 to 3 hours before turning to the desired posi- tion. If the refrigerator is not to be used for long time peri- ods, disconnect the plug and leave the door partially open. This will help reduce the mold/mildew from accumulating inside the refrigerator cabinet.

Fig. A

CARE AND MAINTENANCE

DEFROSTING

This refrigerator is equipped with a “Push Button” (semi-automatic) defrost thermostat system. To activate the defrost cycle, simply push (in) the red defrost button located in the center of the control knob/dial (do not turn the control knob/dial to zero/off). The defrost cycle is ini- tiated immediately. When defrosting is complete, the “Push Button” will release (pop-out) automatically and resume nor- mal operating conditions at the same temperature setting.

NOTE: If the “Push Button” is activated (pushed-in) accidentally, it will not be possible to “manually” pull-out the push button (deactivate the defrost cycle). You must let the defrost cycle run its course. (or) Apply (hold) a dishcloth soaked in hot water against the thermostat capillary line and bracket, located on the underside of the freezer compartment. The heat transfer from the dish cloth will cause a temperature rise on the thermostat capillary (sensing line), causing the internal contacts to close. This will resume nor- mal operating conditions. It may take several minutes and/or repeat applications before the push button will release.

Defrosting of your refrigerator should take place

whenever ice build-up inside the freezer compartment reach- es 1/4” (6mm) thick. Defrosting may take a few hours, depending on the amount of accumulated ice and ambient indoor temperature. To speed up the defrosting process, remove all frozen foods from the freezer section. Leaving the door partially ajar for a short period of time will also speed up the process.

Important: You must remember to close the refrigerator door before the defrost cycle terminates and normal operating conditions resume automatically. The drip tray should be in position directly below the freezer compartment to catch con- densed water during defrosting.

Note: Never use sharp or pointed instruments to remove ice from the freezer compartment. The freezer compartment contains refrigerated gas lines and if accidentally punched/pierced, will render the

refrigerator inoperable and void the manufacturers warranty.

DO NOT ALLOW THE REFRIGERATOR TO CONTINUE OPERATION IF THE FREEZER COMPARTMENT IS PIERCED.

After defrosting is complete, set the control to maximum for 2 to 3 hours before returning to the desired position. When the refrigerator is not to be used for a long period of time, discon- nect the appliance from the electrical supply and leave the door partially open. This will help to reduce mold and mildew build-up.

Note: Wait 3 to 5 minutes before attempting to restart the refrigerator if operation has been interrupted.

5

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Model Modèle Modelo Contents Electrical Requirements Important Safety InformationInstallation Instructions LocationDoor Reversal Instructions Features ICE Cube TrayOperating Instructions Care and MaintenanceTemperature Selection DefrostingIf YOU Move CleaningPower Failure Food Storage SuggestionsTroubleshooting PO SI Ause Soluti NLimited IN-HOME Appliance Warranty Consignes DE Sécurité Important Consignes D’INSTALLATIONEmplacement Conditions ÉlectriquesInstructions DE Porte Réversible Étagères EN Verre CaracteristiquesGlaçons Casier Pour DES OeufsChoix DE LA Température OpérationSoins ET Entretien DégivrageDéménagement EntretienPanne D’ÉLECTRICITÉ Rangements DES AlimentsDépannage Garantie Limitée SUR Appareil Électroménager À Domicile Requisitos Eléctricos Instrucciones DE Seguridad ImportantesInstrucciones D’INSTALACIÓN UbicaciónInstrucciones Para Cambiar Sentido EN Quese Abre Lapuerta Estantes DE Vidrio CaracteristicasCubos DE Hielo Cajilla DE HuevosSelección DE LA Temperatura Instruciónes OperadorasCuidado Y Mantenimiento Instrucciones Para DescongelarLimpieza Y Mantenimiento Solución Sugerida Garantía Limitada Para Electrodoméstico Product Type Model Number Part Description Tipo de Producto Número de Modelo Descripción de la ParteGenre de produit Numéro de modèle Description de la pièce

DCR122BLDD specifications

The Danby DCR122BLDD is a compact refrigerator that epitomizes style and functionality, making it an ideal choice for small spaces such as dorm rooms, offices, or as a secondary fridge in a home. With its sleek black design, it adds a modern touch while seamlessly fitting into any environment.

One of the standout features of the Danby DCR122BLDD is its ample storage capacity. Offering 12 cubic feet of space, this refrigerator provides generous room for all your food and beverages. The adjustable shelves and clear vegetable crisper drawer further enhance the organization, allowing users to customize the layout according to their needs.

This model is equipped with an energy-efficient cooling system, which is an essential characteristic for environmentally-conscious consumers. It meets ENERGY STAR criteria, ensuring that it operates efficiently without sacrificing performance. This eco-friendly feature helps reduce electricity bills while contributing to a lower carbon footprint.

The refrigerator's temperature management system is designed for optimal cooling, with adjustable thermostat controls allowing users to set the desired temperature based on their personal preferences. This precise control ensures that your perishables remain fresh and your beverages are chilled to perfection.

Another impressive technology featured in the Danby DCR122BLDD is its quiet operation. With a powerful compressor that operates silently, this refrigerator is perfect for quiet environments where noise may be a concern, such as bedrooms or study areas.

In terms of practicality, the DCR122BLDD incorporates a reversible door feature, enabling users to configure it to fit their space better, whether in a corner or alongside other appliances. This adaptability makes it a versatile option for various living situations.

Furthermore, the integrated bottle opener adds a touch of convenience, allowing easy access to refreshments without needing to search for tools. With its combination of high capacity, efficient cooling technology, customizable organization, and sleek aesthetics, the Danby DCR122BLDD is a reliable appliance that meets the demands of modern living. Whether for personal use or as part of a larger kitchen setup, it excels in performance and design, catering to consumers looking for quality and efficiency in a compact format.
Top Page Image Contents