TONE ARM AND CARTRIDGE SETTINGS
The third adjustment is the needle (or stylus) pressure. Start with the
The fourth and last adjustment is that of the tone arm height. This will set the tone arm pivot and needle relation with the vinyl. Unlock the tone arm base located in the base of pivot assembly. Rotate the height adjust ring in the pivot base to read the correct setting for the height adjust ring in the pivot base to read the correct setting for the height of the cartridge that you are using. Check the cartridge/arm height table for the correct setting. Be certain to
PART NAMES & FUNCTIONS
2120
1
2 3
4
5
6
7
8
2
9
19
18
17
16
15
14
13
12
|
|
|
|
|
|
|
|
|
|
10 |
| 11 |
1)REVERSE
This button is used to reverse the direction of the platter rotation.
2)START/STOP
Press this button to start or stop the platter.
3)BRAKE
The Brake time is adjustable from 0.2~6 sec.
4)START
The start time is adjustable from 0.2~6 sec.