Danby DFF282SLDB manual Door and Hinge Replacement, Final Steps, Center Hinge, Bottom Hinge

Installation Instructions

DOOR REVERSAL INSTRUCTIONS

NOTE: The left door and the right door stop of the freezer door are different. They can’t replace each other.

DOOR AND HINGE REPLACEMENT

1.Replace the parts for the bottom hinge as shown (see Bottom Hinge graphic). Tighten screws. Replace the refrigerator door.

NOTE: Provide additional support for the doors while the hinges are being moved. Do not depend on the door magnets to hold the doors in place while you are working.

2.Assemble the parts for the center hinge as shown and tighten all screws (see Center Hinge graphic). Replace the freezer door.

3.Assemble the parts for the top hinge as shown (see Top Hinge graphic). Do not tighten screws completely.

4.Line up the doors so that the bottom of the freezer door aligns evenly with the top of the refrigerator door. Tighten all screws.

FINAL STEPS

1.Check all holes to make sure that hole plugs and screws are in place.

2.Plug in refrigerator or reconnect power.

3.Reset the controls (see “ temperature control” section).

4.Return all removable door parts to doors and food to product.

Top Hinge

1

2

3

1.	Top hinge Cover
2.	Top Hinge Spindle

1

1

1.Cover Of Upper Hinge Hole

2

1

1.Hole Plugs

3. Top Hinge

Center Hinge

1

2

3

4

1.Center Hinge Spacer 2.Center Hinge 3.Screws

4.Bush

Bottom Hinge

1

2

3

4 5

6

1.Door Stop 2.Door Stop Screw 3.Door Stop Pole 4.Bottom Hinge 5.Bottom Hinge Screws 6.Adjustable Foot

3

1

2

1.Left Door Stop

2.Door Stop Screw

Accessory

Bag

4

1

1.Door Hinge Hole Plug

5

1

2

1.Door Stop 2.Door Stop Screw

5