Stanton STR8-20 manual Assembly, Placement, Connections

Page 3

ASSEMBLY

1.Remove the main unit with the packing from the box and take off the packing.

2.Insert the turntable platter onto the center spindle.

3.Set the slip mat on the platter.

4.Hold the ribbon tape which is attached to the belt and loop the belt over the motor pulley. Be sure it does not twist.

Ribbon tape

Driving roller

Drive belt

5.Insert the headshell into the front end of the tonearm, then turn the lock nut clockwise with the headshell firmly held horizontally.

6.Slide counterweight onto tonearm.

Twist it lightly and it will screw onto the rear shaft of the tonearm.

7.Adjustment of horizontal zero (0) balance and stylus pressure:

(a)Remove the stylus protector, do not touch the

stylus tip during the adjustment.

(d) Release the arm clamp and lift the tonearm from the arm rest to free it.

(c)Rotate the counterweight until the tonearm is approximately balanced horizontally (floats freely).

(d)Refasten the tonearm with the arm clamp.

(e)Hold the counterweight stationary with one hand and rotate only the stylus-pressure ring to bring the number "0" of the ring into alignment with the center line on the tonearm rear shaft.

(f)Rotate the counterweight clockwise until the scale shows the value corresponding to the pressure of the used stylus. The average stylus pressure of the cartridge body is 2g. If you use a non-Stanton cartridge, please follow that manufacturer’s instructions.

8.Install the dust cover to the main unit.

PLACEMENT

Do not place the unit in a location where it will be exposed to direct sunlight or near a heating appliance.

Do not place the unit in a location where there is high humidity or a lot of dust.

Cartridge may pick up slight sound pressures or vibrations from the speakers coming along the floor

or through the air resulting in feedback. Find a location which is very stable and vibration free.

The legs have functions for adjusting the height of the unit itself. Adjust the legs to stabilize the main body horizontally.

CONNECTIONS

1.Connect the power cord to the auxiliary power outlet on the rear panel of your amplifier or receiver or to a household AC outlet.

2.Connect the unit output terminals to the PHONO jack of your amplifier or receiver.

Output terminals

 

Amplifier(Receiver)

L (White)

>>

L Channel

R (Red)

>>

R Channel

GND (Spade)

>>

GND

NOTE:

Be sure to connect the ground terminal firmly to the amplifier or receiver.

If this connection is not made or is loose, a power source "HUM" will result.

Image 3
Contents STR8-20 Before USE Name of PartsAssembly PlacementConnections Maintenance SpecificationsOperation

STR8-20 specifications

The Stanton STR8-20 is a remarkable turntable that embodies both functionality and design, making it a favorite among DJs and vinyl enthusiasts. Known for its sturdy build and high-quality performance, it offers a compelling blend of features that cater to both beginners and seasoned professionals.

One of the standout characteristics of the STR8-20 is its direct drive motor system, which provides exceptional torque and stability. This technology ensures that the platter reaches speed quickly and maintains consistent RPMs, making it ideal for beatmatching and mixing. The turntable is designed with a straight tonearm, which helps to reduce tracking error and improves playback accuracy. This design choice not only enhances sound quality but also makes the STR8-20 a perfect choice for scratching and other DJ techniques.

The Stanton STR8-20 comes equipped with a high-quality Stanton 300 cartridge, which is capable of delivering rich sound quality and detail. The cartridge is replaceable, allowing users to upgrade or customize their audio experience according to their preferences. In addition to its superior audio performance, the turntable features pitch control functionality, enabling DJs to adjust the playback speed by ±10%. This capability is essential for tempo matching between tracks, providing flexibility during performances.

Another noteworthy feature of the STR8-20 is its robust construction. The turntable is built with a heavy chassis that minimizes vibration and resonances, ensuring a clean audio output. The integrated anti-skate control helps maintain a stable needle placement, allowing for more precise playback. Additionally, the turntable features a removable headshell, which facilitates easy cartridge replacement and setup.

The STR8-20 is also equipped with a USB output, enabling users to digitize their vinyl collection easily. This feature allows for seamless integration with computer software, making it possible to convert analog sound into digital formats without losing quality.

Overall, the Stanton STR8-20 is a powerful tool for any DJ or audiophile. Its combination of advanced technology, user-friendly features, and solid construction make it a versatile option for both studio use and live performances. Whether you are a professional DJ or a hobbyist, the STR8-20 is designed to enhance your vinyl experience and elevate your sound.