Danby DMW101KSSDD Setting Kitchen Timer, Microwave Cooking, Setting a Cooking Program

OPERATION

SETTING

THE CLOCK Your microwave clock is a 12-hour system.

1)Press “CLOCK”.

2)Press the number keys and enter the current time. For example, to set 12:10, press “1, 2, 1, 0” in turn.

3)Press “CLOCK” to finish clock setting..

NOTES:

•When the microwave oven is first plugged in or when power resumes after a power interruption, the display will show ENTER CLOCK TIME. If you prefer to not have the clock displayed, press RESET.

•You can check the clock time while cooking is in progress by touching the CLOCK pad.

SETTING THE

KITCHEN TIMER

1)Press “TIMER”.

2)Press the number keys and enter the timer time (the maximum cooking time is 99 minutes and 99 seconds).

3)Press “START/STOP”.

NOTES:

• The kitchen timer is different from the 12-hour

clock system and is intended only for use when timing.

•Timer countdown can be seen in the display before the clock or cooking time is returned to the display.

•Press TIMER pad and then press RESET to cancel TIMER during timing process.

MICROWAVE

COOKING

SETTING A COOKING PROGRAM:

A) One-Stage Cooking.

1)Use the number pads to set a cooking time. You can set a cooking time from one second to 99 minutes and 99 seconds.

2)If you want to set a power level other than 100% power, touch POWER LEVEL and then use the number pads to enter the power level desired.

3)Touch START/STOP to start cooking.

USE THESE SINGLE DIGITS TO

REPRESENT POWER LEVELS:

Number	% of Power
9	90%
8	80%
7	70%
6	60%
5	50%
4	40%
3	30%
2	20%
1	10%

B) Two-Stage Cooking.

1)Set STAGE 1: Follow steps 1 and 2 in “One- Stage Cooking”. DO NOT touch START/STOP.

2)Set STAGE 2: Touch COOK, then enter desired cooking time and power level. Most two-stage recipes use lower power for the second stage.

3)Touch START/STOP.

NOTE: After total time has elapsed, signal sounds and END appears in the display. Touch any pad or open the microwave oven door to clear END before starting another cooking fucntion.

8