Danby DBD5L Preparing the Beverage Container, Using the White Beverage Container Adapter

CONNECTING THE BEVERAGE DISPENSER

Preparing the Beverage Container

USING THE WHITE BEVERAGE CONTAINER ADAPTER

To connect the WHITE ADAPTER to the 5L Beverage

Container, follow these instructions.

NOTE: MAKE SURE ALL COMPONENTS ARE

PROPERLY SANITIZED PRIOR TO EACH USE.

PREPARING THE BEVERAGE CONTAINER

To prepare the Beverage Container, please follow these instructions:

BEVERAGE CONTAINER

WHITE ADAPTER

YELLOW RISING PIPE

AIR-CONNECT TUBE

DISPENSING TUBE WITH BLACK STOPPER

1.Fill the beverage container with a beverage of your choice. Make sure to fill only to the lower edge of the handles. Fasten the RISING PIPE securely into the WHITE ADAPTER (See Figure 12).

GETTING THE CONTAINER READY

2.Insert the RISING PIPE and the WHITE ADAPTER into the container. Position the inlet grooves on the ADAPTER over the handles. Make sure it is securely fastened (See Figure 13).

SETTING UP THE DISPENSING TUBE

3.Pull the tap handle completely down and push the DISPENSING TUBE into the tap. Make sure the BLACK STOPPER fits securely in the inlet just before the tap (See Figure 14)

4.Make sure the DISPENSING TUBE is slightly exposed below the tap (See Figure 14).

SETTING UP THE AIR CONNECT TUBE

5.Connect the AIR-CONNECT TUBE to the AIR OUT valve located in the back of the unit. Place the CLIP over the valve to ensure an air-tight seal.

FASTEN

RISING PIPE INTO WHITE ADAPTER (turn in clockwise Direction)

Figure 12

FASTEN UNDER

GROOVES

Figure 13

BLACK STOPPER

TUBE IS

EXPOSED

Figure 14

13