Operating Instructions
The Controls of your
Wine Cooler
2 | 3 | 5 | 6 |
1 |
| 4 |
|
|
|
|
1.
: Indicator light illuminates to signify the cooling mode is currently in operation.
5.‘ 
’ Button : Used to set the temperature in the upper zone (see ‘Setting the Temperature’ below).
2.
Window : For viewing the temperature of the upper zone.
3.
Window : For viewing the temperature
‘
’ Button : Used to set the temperature in the lower zone (see ‘Setting the Temperature’ below).
of the lower zone.
4.°C/°F : Adjacent indicator light denotes which scale of temperature is displayed.
6. 
: To control the inner light
turn ON/OFF.
‘’ Switch:Continuous illumination.
‘O’Switch:Illumination only when the door is open.
Setting the Temperature
I M P O R TA N T
In the event of a power fail- ure, wait 3 to 5 minutes before restarting.
•To switch the display between the Fahrenheit (°F)
and Celsius (°C) scale, depress the 
and 
control buttons simultaneo- usly for approximately five(5) seconds.
•The temperature range can be set as low as 39°F (4°C) or as high as 64°F (18°C) to suit your specific storage requirements. Each depres-
sion of the 
or 
but- ton will allow you adjust the temperature in 1° degree increments within the afore- mentioned range.
6