Danby DCR88BLDD Operating Instructions, Care and Maintenance, Temperature Selection, Defrosting

Page 5

OPERATING INSTRUCTIONS

To avoid vibration, the unit must be set level. This is accomplished by adjusting the (1) front leveling leg located under the refrigerator. The temperature of the refrigerator is controlled by setting the thermostat knob to a desired setting.

TEMPERATURE SELECTION

To start the refrigerator, turn the temperature control knob to the position corresponding to the desired cooling (on the graduated blue dial) in Fig. A. The refrigerator temperature will vary depending on the quantity of the food stored, and on the frequency with which the door is opened.

To turn the control to the “OFF” position, rotate the control knob to the “0” setting. After defrosting and if the refrigerator has been left out of use for some time, set the control to maximum for 2 to 3 hours before turning to the desired posi- tion. If the refrigerator is not to be used for long time peri- ods, disconnect the plug and leave the door partially open. This will help reduce the mold/mildew from accumulating inside the refrigerator cabinet.

Fig. A

CARE AND MAINTENANCE

DEFROSTING

This refrigerator is equipped with a “Push Button” (semi-automatic) defrost thermostat system. To activate the defrost cycle, simply push (in) the red defrost button located in the center of the control knob/dial (do not turn the control knob/dial to zero/off). The defrost cycle is ini- tiated immediately. When defrosting is complete, the “Push Button” will release (pop-out) automatically and resume nor- mal operating conditions at the same temperature setting.

NOTE: If the “Push Button” is activated (pushed-in) accidentally, it will not be possible to “manually” pull-out the push button (deactivate the defrost cycle). You must let the defrost cycle run its course. (or) Apply (hold) a dishcloth soaked in hot water against the thermostat capillary line and bracket, located on the underside of the freezer compartment. The heat transfer from the dish cloth will cause a temperature rise on the thermostat capillary (sensing line), causing the internal contacts to close. This will resume nor- mal operating conditions. It may take several minutes and/or repeat applications before the push button will release.

Defrosting of your refrigerator should take place

whenever ice build-up inside the freezer compartment reach- es 1/4” (6mm) thick. Defrosting may take a few hours, depending on the amount of accumulated ice and ambient indoor temperature. To speed up the defrosting process, remove all frozen foods from the freezer section. Leaving the door partially ajar for a short period of time will also speed up the process.

Important: You must remember to close the refrigerator door before the defrost cycle terminates and normal operating conditions resume automatically. The drip tray should be in position directly below the freezer compartment to catch con- densed water during defrosting.

Note: Never use sharp or pointed instruments to remove ice from the freezer compartment. The freezer compartment contains refrigerated gas lines and if accidentally punched/pierced, will render the

refrigerator inoperable and void the manufacturers warranty.

DO NOT ALLOW THE REFRIGERATOR TO CONTINUE OPERATION IF THE FREEZER COMPARTMENT IS PIERCED.

After defrosting is complete, set the control to maximum for 2 to 3 hours before returning to the desired position. When the refrigerator is not to be used for a long period of time, discon- nect the appliance from the electrical supply and leave the door partially open. This will help to reduce mold and mildew build-up.

Note: Wait 3 to 5 minutes before attempting to restart the refrigerator if operation has been interrupted.

4

Image 5
Contents Model Modèle Modelo Contents Installation Instructions Important Safety InformationElectrical Requirements LocationDoor Reversal Instructions FeaturesICE Cube Tray Glass ShelvesTemperature Selection Care and MaintenanceOperating Instructions DefrostingPower Failure CleaningIf YOU Move Food Storage SuggestionsPO SI Ause Soluti N TroubleshootingProblem Possible Cause Possible Solution Limited IN-HOME Appliance Warranty Emplacement Consignes D’INSTALLATIONConsignes DE Sécurité Important Conditions ÉlectriquesInstructions DE Porte Réversible CaracteristiquesGlaçons Étagères EN VerreSoins ET Entretien OpérationChoix DE LA Température DégivragePanne D’ÉLECTRICITÉ Entretien Pendant LES VacancesDéménagement Rangements DES AlimentsDépannage Probleme Cause Probable SolutionGarantie Limitée SUR Appareil Électroménager À Domicile Instrucciones D’INSTALACIÓN Instrucciones DE Seguridad ImportantesRequisitos Eléctricos UbicaciónInstrucciones Para Cambiar Sentido EN Quese Abre Lapuerta CaracteristicasCubos DE Hielo Estantes DE VidrioCuidado Y Mantenimiento Instruciónes OperadorasSelección DE LA Temperatura Instrucciones Para DescongelarLimpieza Y Mantenimiento Causa Solución Sugerida ProblemaSolución Sugerida Garantía Limitada Para Electrodoméstico Product Type Model Number Part Description DCR88WDD / DCR88BLDD / DCR88BSLDDTipo de Producto Número de Modelo Descripción de la Parte Genre de produit Numéro de modèle Description de la pièce

DCR88BLDD, DCR88WDD specifications

The Danby DCR88WDD and DCR88BLDD are compact and stylish refrigerators designed to meet the needs of small spaces, making them ideal for dorm rooms, offices, and apartments. Both models offer versatile features and practical technologies that enhance their usability.

Starting with the design, both the DCR88WDD and DCR88BLDD are available in modern finishes — white and black, respectively. This variety allows consumers to choose a look that complements their space perfectly. The space-saving design is coupled with an impressive 3.1 cubic feet of capacity, providing ample room for fresh food and beverages without taking up too much floor space.

One of the standout features of both models is their Energy Star certification. This ensures that they consume less energy compared to standard refrigerators, translating to lower utility bills and a reduced carbon footprint. The efficient cooling system is designed to maintain optimal temperatures while using minimal energy, making both refrigerators environmentally friendly options.

The interior layout is thoughtfully designed, featuring adjustable shelves to customize the space based on individual needs. This flexibility allows users to maximize storage for different sizes of items, from tall bottles to small containers. Additionally, both models come with a can rack and door storage, making it easy to access frequently used items without rummaging through the fridge.

Another key feature is the mechanical thermostat, which provides precise temperature control for optimal food preservation. Users can easily adjust settings to suit their requirements, ensuring ideal conditions for food storage. The refrigerator section is complemented by a freezer compartment, which is perfect for ice cubes and frozen treats, further enhancing the functionality of these compact units.

In terms of convenience, both the DCR88WDD and DCR88BLDD come equipped with a reversible door hinge, allowing users to adapt the fridge’s configuration to their space. Whether you have limited space or want to customize the refrigerator’s entry, this feature offers added flexibility.

Overall, the Danby DCR88WDD and DCR88BLDD models are noteworthy for their combination of style, energy efficiency, and innovative features. They provide an excellent solution for anyone looking to maximize storage in small areas without compromising on quality or performance. With their user-friendly design and practical functionalities, these compact refrigerators stand out as reliable choices for modern living.