Dometic RGE 2000 installation instructions Electrical operation, Gas operation

6.1.2Electrical operation

AC 230V~

This option should only be selected where the supply voltage of the connection for power supply corresponds to the value specified on the data plate. Any difference in values may result in damage the appliance.

1. Set energy

Aselector switch

2. Use rotary

switch (B) to

(A) to 230V .

B

regulate the

temperature in the

main refrige-

rator compartment.

6.1.3Gas operation

The refrigerator should only be operated using liquid gas (propane, butane). Do not use town gas or natural gas.

Manual ignition (Piezo-igniter)

1.Open the valve of the gas cylinder

A

C

2. Set energy			3. Press and hold (B)
selector switch (A)			rotary switch.
to gas.
	B
4. Activate Piezo
		5. The needle reaches the green
ignition (C)			range if the flame is ignited
several times at
intervals 1
second.

6.Keep rotary switch (B) depressed for another 10-15 seconds, then release.

7.Check the galvanometer to see whether the flame is burning.

8.Repeat the entire process if the flame has been extinguished.

9.Use rotary switch (B) to regulate the temperature in the main refrigerator compartment.

All gas operated refrigerators are equipped with an automatic flame protec- tion, which automatically cuts off the supply of gas approximately 30 seconds after the flame has been extinguished.

When using for the first time, and after changing the gas cylinder, the gas pipes may contain air. By means of brief operation of the refrigerator and any other gas appliances (e.g. cookers), air is removed from the gas pipes. The gas will then ignite without delay.

10