Dometic RM2354 manual Description of Operating Modes Auto Mode, Limp Mode of Operation

Page 10

Refrigerator control panel

A DE

ON DC AUTO

1 2 3

OFF

AC

GAS

CHECK

B C

DESCRIPTION OF OPERATING MODES AUTO MODE

When operating in the AUTO mode, the AUTO mode indicator lamp (D) will illuminate.

The control system will automatically select between AC and GAS operation with AC having priority over GAS. Either the AC indicator lamp (B) or the GAS indicator lamp (C) will illuminate depending on the energy source selected by the control system. If the control system is operating withAC energy and it then becomes unavailable, the system will automatically switch to GAS. As soon as AC becomes available again the control will switch back to AC regardless of the status of GAS operation.

GAS MODE

When operating in the GAS mode the AUTO mode in- dicator lamp (D) will be off and the GAS mode indicator lamp (C) will be illuminated. This mode provides LP gas operation only. The control system will activate the igni- tion system and will make three attempt to light the burner for a period of approximately 45 seconds with two min- utes interval. If unsuccessful, the CHECK indicator lamp

(E)will illuminate and the GAS mode indicator lamp (C) will turn off.

To restart GAS operation, press the main power ON/OFF button (1) to the OFF and then ON position. The control system will attempt a new ignition sequence.

If the refrigerator has not been used for a long time or the LP tanks have just been refilled, air may be trapped in the supply lines. To purge the air from the lines may require resetting the main power ON/OFF button (1) three or four times. If repeated attempts fail to start the LP gas operation, check to make sure that the LP gas supply tanks are not empty and all manual shutoff valves in the lines are open. If the problem is still not corrected, con- tact a service center for assistance.

If the control is switched to AC or DC operation while the CHECK indicator lamp is on, it will function properly, but the CHECK indicator lamp will not go off until the main power ON/OFF button is pressed to the OFF then ON position.

COLD 1 2 3 4 5 COLDEST

4

F

DC MODE

When operating in the DC mode the DC mode indicator lamp (A) will be illuminated. All other mode lamps will be off. The DC mode overrides all other operating modes. If one of the other operating modes is desired, the DC selector button (2) must be pressed to turn OFF the DC lamp (A).

IMPORTANT:

To prevent the refrigerator from being left on and draining the battery when the vehicle’s engine is not running and charging the battery.

It is recommended that an automatic cut-out relay be installed between the battery and the refrigerator toggle switch so that the refrigerator will not draw current when the ignition of the vehicle is switched off.

Alternatively, a suitable plug and receptacle should be installed in the 12 Volt supply line, so that the refrigerator can be disconnected from the supply, as necessary.

LIMP MODE OF OPERATION

This control system contains a feature where it will con- tinue to operate the cooling system in the event of a fail- ure of a major operating component. Two different modes of operation can occur in this category.

If for some reason the display module becomes non func- tional, the control system will revert to full automatic op- eration selecting the best energy source available with AC, DC and GAS priority. The temperature of the refrig- erator will be maintained at the MID position within nor- mal temperature tolerances. The power module will con- tinually attempt to reestablish operation of the display module.

The second limp mode of operation will execute when a failure of the temperature sensing device or associated electronic circuitry occurs.

If this should occur, the control system will operate on the energy source selected via the control panel. The cooling unit will run continuously on the selected energy source.

The refrigerator will continue to operate in this mode in- definitely or until a new sensor is installed and the sys- tem is reset.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Refrigerator for LP-GAS and Electric Operation For Service Center AssistanceFrench Page Refrigerator control panel General Instruction Certified InstallationMethods of Installation VentilationClearances Ventilation HeightsSide view Drain water hose Installing Refrigerator in EnclosureSecuring the Refrigerator GAS ConnectionVolts AC Connection Testing LP GAS Safety ShutoffElectrical Connection Volts DC ConnectionInstructions for Mounting the Door Panel Panel DimensionsChanging Door Swing to Opposite Side Importance of Leveling a RefrigeratorGAS Mode Start UP Instructions DC ModeAuto Mode ThermostatDescription of Operating Modes Auto Mode Limp Mode of OperationHOW to USE the Refrigerator Heater GAS Equipment AssemblyPeriodic Maintenance Refrigerator RemovalFuses Troubleshooting Refrigerator Does Not Cool ProperlyPower module Line fuseSpare Parts Certified Vent System KitsDescription Removing and replacing of shelves General RM2354

RM2354 specifications

The Dometic RM2354 is a highly regarded absorption refrigerator designed specifically for the needs of travelers, especially those who enjoy the RV lifestyle. With its innovative features and user-friendly design, the RM2354 makes food storage convenient and efficient while on the road.

One of the standout features of the Dometic RM2354 is its versatile power source capabilities. This model can operate efficiently on 3-way power sources—120V AC, 12V DC, and propane. This flexibility allows users to choose the most suitable power option depending on their circumstances and energy availability, making it an excellent choice for extended trips where power sources may vary.

In terms of storage capacity, the RM2354 does not disappoint. With a total storage volume of 3.7 cubic feet, it effectively accommodates food and beverages for various camping trips or road journeys. The refrigerator features adjustable shelves and door bins, providing customizable space to keep items organized and easily accessible. The adjustable thermostat ensures that users can maintain their desired temperature, whether it's for preserving fresh produce or storing cold drinks.

Another significant characteristic of the Dometic RM2354 is its efficient absorption cooling system. This technology allows the refrigerator to operate quietly, making it ideal for various environments, including serene campsites. The absorption cooling method uses ammonia, making it an eco-friendly choice, as it avoids the use of harmful refrigerants commonly found in traditional compressor refrigerators.

Additionally, the Dometic RM2354 is built with durability and ruggedness in mind, designed to withstand the vibrations and movements associated with life on the road. Its exterior is constructed from robust materials that can handle the challenges of travel while providing excellent insulation to ensure energy efficiency.

User-friendly features such as automatic ignitions and simple controls enhance the usability of the RM2354, making it accessible even for those who may be less mechanically inclined. The built-in safety features ensure proper operation, allowing users to focus on their adventures without worrying about the safety of their food storage.

In summary, the Dometic RM2354 absorption refrigerator combines versatility, efficiency, and durability, making it an ideal companion for RV enthusiasts and travelers. Its 3-way power source, ample storage capacity, quiet operation, and eco-friendly technologies offer everything one would expect in a reliable refrigerator for on-the-go lifestyles.
Top Page Image Contents