Operating instructions, GAS and AC operation

operating instructions

GAS and AC operation

LP gas operation

Before starting the refrigerator, check that all the manual gas valves are in the ON position. Do not forget the manual shutoff valve on the rear of the refrigerator.

1.To start the refrigerator, turn knob A to the “GAS” position.

2.Turn the thermostat knob B to position 4.

3.Press and hold button C and press button D for the piezo igniter several times to light the burner. This can be observed on the flame indicator E. When the flame is on, the red indicator is in the green field (ON).

4.After the gas is lit, keep the button C pressed for 10 seconds. Release the button and check that the

RED indicator is in the GREEN field, (ON).

5.To shut off the refrigerator turn the knob A to “OFF”.

Note! After changing an LP tank, or after a long shut off pe- riod, the gas line is likely to be filled with air. You may have to repeat the lighting procedure several times to purge the air out of the gas lines.

WARNING

Whilst mobile:

-Do not operate the refrigerator on LP gas.

-Turn off the gas bottle.

230-240 V AC OPERATION

Before operating the refrigerator, check that the voltage stated on the data plate is the same as the main voltage in use.

1.Check to be sure that the power cord is properly connected to the power supply.

2.Turn the knob A to the position marked “AC” for 230-240 volt AC operation.

3.Turn the thermostat knob B to position 4.

REGULATING THE TEMPERATURE

The refrigerator is equipped with a thermostat that can be adjusted by turning the knob B to different setting to maintain the desired cabinet temperature.

Gas operation

•At “OFF, the thermostat closes its main valve and the burner runs continuously at the bypass rate, just enough to keep the burner lit.

•At “MAX”, the thermostat allows the burner to remain on high flame continuously.

AC operation (230-240 V AC)

•At “OFF, the contacts in the thermostat are open and the heating elements are off.

•At “MAX”, the heating element is “ON” continuously.

Lowest cabinet and freezer temperatures are obtained at this setting.

The thermostat can be adjusted between “MAX” and “OFF” to obtain the desired cabinet temperature. The closer the knob is to “MAX” - the colder the cabinet temperature. The closer the knob is to “OFF” - the warmer the cabinet temperature.

When the thermostat reaches the set temperature, it will cut the burner back to bypass or, in electric operation (230-

240 V AC), shut off the heating element. The setting of the thermostat is not critical, but we recommend it be adjusted to maintain a dry frost on the cooling fins. Adjust the ther- mostat knob closer to “MAX” when the outside temperature becomes warm.

Turning off the refrigerator

To shut off the refrigerator turn the knob A to “OFF”.

If the refrigerator will not be in operation for a period of weeks, it should be emptied, defrosted, cleaned and the door left ajar. The ice tray should also be dried and kept outside the cabinet.

RM2453 specifications

The Dometic RM2453 is a cutting-edge absorption refrigerator designed specifically for use in recreational vehicles, boats, and off-grid living spaces. With a capacity of 8.7 cubic feet, it offers ample storage space for food and beverages, making it an excellent choice for those who value convenience and efficiency on the road.

One of the standout features of the RM2453 is its innovative absorption cooling technology. Unlike traditional compressors, which can be noisy and consume a lot of energy, the RM2453 operates silently and requires minimal power. This is particularly beneficial for RV and marine applications, where noise reduction and energy efficiency are paramount. The refrigerator uses a unique ammonia-based cooling system, which is not only efficient but also environmentally friendly. This ensures that users can enjoy a consistent temperature without the disturbance of compressor noise or the drawbacks of refrigerants that may harm the environment.

The Dometic RM2453 is equipped with a three-way power source, allowing it to operate on AC, DC, and propane. This versatility means that users can easily switch between power sources depending on their needs and availability, ensuring that the refrigerator remains operational regardless of their location. Whether plugged into a campsite electrical hookup, running off the vehicle’s battery, or utilizing propane while boondocking, the RM2453 provides flexibility that many other refrigerators cannot match.

Another notable characteristic of the RM2453 is its user-friendly design. It features adjustable shelving, allowing users to customize the internal configuration to accommodate various sizes of food items and containers. The reversible door hinge offers greater flexibility in terms of installation and access, ensuring that the refrigerator can fit seamlessly into any space.

In terms of build quality, the Dometic RM2453 is designed for durability. Its robust construction is engineered to withstand the rigors of travel and the marine environment. With a sleek and modern aesthetic, it not only performs exceptionally but also enhances the overall look of the kitchen or galley it occupies.

Overall, the Dometic RM2453 stands out in the market for its combination of energy efficiency, versatility, and practical design. It remains a top choice for those seeking a reliable refrigerator solution for their mobile lifestyle, delivering excellent performance and convenience in a compact package.