Power Safety

Important Safety and Installation Instructions

This section contains definitions, warnings, and practical information to ensure a safe working environment.

Pleasetaketime to read this section beforeinstallingor using this unit. Pleasedo not disposeof theseinstructions.

•Read these instructions

•Keep these instructions

•Heed all warnings

•Follow all instructions

•Do not use this apparatus near water

•Do not expose this apparatus to rain or moisture.

•Clean only with a dry cloth

•Do not block any ventilation openings. Install with accordance with the manufacturer’s instructions.

•No naked flames, such as lighted candles, should be placed on the apparatus.

•Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat.

•There are no user-adjustments, or user-serviceable items, inside this apparatus. Do not remove the covers of this apparatus; doing so will invalidate your warranty.

•Adjustments or alterations to this apparatus may affect the performance such that safety and/or international compliance standards may no longer be met.

•Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally or has been dropped.

Caution

•Hazardous voltages may be present inside this apparatus.

•Do not operate this apparatus with the covers removed.

•To reduce the risk of electric shock, do not perform any servicing other than that contained in these Installation Instructions unless you are qualified to do so. Refer all servicing to qualified service personnel and ensure that all power cords are disconnected when servicing this apparatus.

•Only use attachments/accessories specified by the manufacturer.

•This apparatus is fitted with a universal power supply, approved and certified for operation in this apparatus. There are no user-replaceable fuses.

•An external over-current protection device is required to protect the wiring to this apparatus. This protection device must be installed according to current wiring regulations. In certain countries this function is supplied by use of a fused plug.

•If an extension power cable or adaptor is used, ensure that the total power rating of the power cable and/or adaptor is not exceeded.

•An external disconnect device is required for this apparatus; a

detachable power cord is a suitable disconnect device.

•The apparatus should be located close enough to an AC outlet so that you can easily grasp the power cord plug at any time.

•This apparatus is a Class I construction and shall be connected to an AC outlet with a protective grounding connection.

•Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

•Unplug this apparatus during lightning storms or when unused for long periods of time.

•All power cords must be disconnected to isolate this apparatus completely.

•Caution: To reduce the risk of electric shock, plug each power supply cord into separate branch circuits employing separate service grounds

•This equipment is not supplied with a detachable power cord. The device should be connected to a power supply only of the type described in the Installation Guide or as marked on the device. The power cord must be earthed and precautions should be made so that the grounding is not defeated. A mains cord, fitted with an IEC 60320 C13 type socket, appropriate sized conductors and plug to suit local electrical requirements.

•The power supply cord (i.e. conductor, coupler [IEC 60320 C13] and plug combination) must be suitably rated for the apparatus and the country of use (meeting local electrical requirements). A power supply cord with a rating of not less than 125% of current rating is suitable. The minimum rating for the power supply cord at 110 / 230V ac to be 1A.

Installation

•When installing this apparatus, either fix it into a standard 19” rack or place the apparatus on a secure level surface. When this apparatus is rack mounted, fit all rack screws.

•Ensure that no strain is placed on the cables connecting to this apparatus. Ensure also that such cables are not placed where they can be stepped on, pulled or tripped over.

•Do not operate this apparatus whilst it is covered or boxed in any way.

1266 specifications

The Solid State Logic 1266 is a premium analog channel strip renowned for its versatility and high-quality audio processing. This channel strip combines sophisticated features, advanced technologies, and the renowned SSL sound, making it a favorite among audio engineers and producers.

One of the standout features of the SSL 1266 is its classic SSL EQ, which boasts four bands of equalization. Each band offers selectable frequency ranges, allowing users to perform precise tonal adjustments. The high and low bands can operate as shelving or peak filters, providing flexibility in shaping sound. This powerful EQ section is complemented by a dynamic section, which includes an LED-level meter and a compressor/limiter. The compressor is characterized by its smooth response, allowing for detailed dynamic control over tracks, while the limiter provides an additional safety net for preventing signal clipping.

Another key feature is the inclusion of the iconic SSL mic preamp circuitry. The 1266 is equipped with a transformer-balanced mic pre, designed to deliver warmth and presence to vocals and instruments. It provides ample gain, ensuring the ability to capture signals clearly, even from low-output microphones. The design is meticulous, featuring very low noise and distortion levels, resulting in pure, transparent sound reproduction.

The SSL 1266 also incorporates the brand's proprietary 'SuperAnalog' technology, which enhances the overall sonic performance. This technology ensures low noise and high headroom, allowing the channel strip to handle high-level signals without compromising audio integrity. Additionally, the unit is designed with a robust build quality, featuring a durable chassis and high-grade components that ensure longevity and reliability in studio environments.

Furthermore, the 1266 includes features such as a high-pass filter and an insert point for integrating external processors, providing even more flexibility in sound design. It is also equipped with a line input and a balanced output, further enhancing connectivity options.

The Solid State Logic 1266 channel strip exemplifies the perfect blend of classic analog warmth and modern functionality. It caters to a wide range of applications, from tracking to mixing, making it an indispensable tool for any audio professional seeking to elevate their sound. With its comprehensive features and SSL's legacy of quality, the 1266 is a worthy investment for those aiming for excellence in audio production.