Adjusting the Controls, Cooling On/Off

Adjusting the Controls

If you need to adjust the temperature in either the refrigerator or freezer compartment, use the settings listed in the following chart as a guide.

■Press the TEMP button to display the desired number of snowflakes (1 snowflake [least cold] to all snowflakes [coldest]).

NOTE: Except when starting the refrigerator, do not adjust the control more than one setting at a time. Wait 24 hours between adjustments for the temperature to stabilize.

CONDITION/REASON:	ADJUSTMENT:

REFRIGERATOR too warm	REFRIGERATOR Control
	one setting higher

FREEZER too warm/too little ice	FREEZER Control one
	setting higher

REFRIGERATOR too cold	REFRIGERATOR Control
	one setting lower

FREEZER too cold	FREEZER Control one
	setting lower

Cooling On/Off

■Press and hold TEMP for 3 seconds to turn cooling off. To turn cooling back on, press and hold TEMP again for 3 seconds.

NOTE: Neither compartment will cool when the control is set to OFF.

Additional Features

Filters Reset (on some models)

The Filters Reset control allows you to restart the filter status tracking feature each time you replace the air filter or water filter.

■Press and hold FILTERS RESET for 3 seconds. The filter icons will turn off. See “Install Air Filter” and “Water Filtration System.”

Exterior Dispenser Models

The control panel is located above the exterior dispenser.

IMPORTANT: The display screen on the dispenser control panel will turn off automatically and enter “sleep” mode when the control buttons and dispenser levers have not been used for

2 minutes or more. While in “sleep” mode, the first press of a control button will only reactivate the display screen, without changing any settings. After reactivation, changes to any settings can then be made. If no changes are made within 2 minutes, the display will re-enter “sleep” mode.

■Touch any control button on the dispenser panel to activate the display screen.

Adjusting the Controls

For your convenience, the temperature control is preset at the factory. When you first install your refrigerator, make sure that the control is still set to the recommended temperature setting

(3 snowflakes), as shown.

If you need to adjust the temperature in either the refrigerator or freezer compartment, use the settings listed in the following chart as a guide.

■Wait at least 24 hours between adjustments. Recheck the temperatures before other adjustments are made. The single temperature control ranges from 1 snowflake (least cold) to 5 snowflakes (coldest). When adjusting temperature set points, use the following chart as a guide.

CONDITION:	TEMPERATURE
	ADJUSTMENT:

REFRIGERATOR or FREEZER	Press the left-hand
too cold	TEMPERATURE button to
	adjust the temperature
	one setting
	less cold (2 snowflakes)

REFRIGERATOR or FREEZER	Press the right-hand
too warm	TEMPERATURE button to
	adjust the temperature
	one setting
	colder (4 snowflakes)

Cooling On/Off

Your refrigerator and freezer will not cool when cooling is turned off.

■To turn cooling off, press and hold both TEMPERATURE buttons at the same time for 3 seconds. When cooling is off, “Cooling Off” will appear on the display screen.

■To turn cooling back on. Press and hold both TEMPERATURE buttons at the same time for 3 seconds. When cooling is on, “Cooling Off” will disappear from the display screen.

whirlpool specifications

Whirlpool, a leading name in home appliances, offers a wide range of washing machines designed to provide efficient cleaning and convenience. Renowned for their innovative technologies and user-friendly features, Whirlpool washing machines cater to a diverse range of washing needs.

One of the standout features of Whirlpool washing machines is their load sensing technology. This smart feature detects the weight of the load and automatically adjusts the water levels and cycle duration, ensuring optimal water and energy use. This not only enhances performance but also contributes to sustainability by minimizing unnecessary water consumption.

Whirlpool also incorporates advanced washing cycles in their machines. The EcoWash cycle, for instance, is designed for efficient cleaning while using less water and energy, making it an ideal choice for environmentally conscious consumers. Additionally, the Delicate cycle ensures that fragile fabrics receive a gentle wash, protecting them from damage while effectively removing dirt.

Another notable characteristic is the FreshCare option, available in several Whirlpool models. This technology periodically tumbles the laundry after the cycle has finished, preventing wrinkles and musty odors, and keeping clothes fresh for hours. This is particularly useful for those who might not be able to move their laundry immediately after the wash cycle concludes.

Whirlpool washing machines also come equipped with an intuitive control panel featuring a range of pre-set programs. Users can easily select the desired wash type based on fabric type and soil level, ensuring tailored care for garments. Many models also offer a delay start feature, allowing users to schedule their wash cycles to start at a convenient time.

Durability and ease of maintenance are other key characteristics of Whirlpool washers. Many of their models come with a reliable stainless steel drum, which is both resistant to rust and capable of handling large loads without compromising performance. The self-cleaning technology found in select models further enhances longevity by automatically washing the drum and maintaining optimal hygiene.

In conclusion, Whirlpool washing machines combine cutting-edge technology and thoughtful design to deliver effective, efficient, and user-friendly laundry solutions. With features like load sensing, diverse washing cycles, FreshCare technology, and intuitive control options, Whirlpool continues to set the standard for innovation and reliability in the home appliance market. Whether for everyday use or special care garments, Whirlpool washing machines provide versatility and peace of mind for every household.