Installation Instructions

Gas Pressure Regulator

The gas pressure regulator supplied with this oven must be used. The inlet pressure to the regulator should be as follows for proper operation:

Natural gas:

Minimum pressure: 5" WCP

Maximum pressure: 14" WCP

LP gas:

Minimum pressure: 11" WCP

Maximum pressure: 14" WCP

Contact local gas supplier if you are not sure about the inlet pressure.

Burner Input Requirements

Input ratings shown on the model/serial rating plate are for elevations up to 2,000 ft (609.6 m).

For elevations above 2,000 ft (609.6 m), the burner should be reduced 4% for each 1,000 ft (304.8 m) above sea level (not applicable for Canada).

Gas Supply Pressure Testing

Gas supply pressure for testing regulator must be at least

1" water column pressure above the manifold pressure shown on the model/serial rating plate.

Line pressure testing above ½ psi gauge (14" WCP)

The oven and its individual shutoff valve must be disconnected from the gas supply piping system during any pressure testing of that system at test pressures in excess of ½ psi (3.5 kPa).

Line pressure testing at ½ psi gauge (14" WCP) or lower

The oven must be isolated from the gas supply piping system by closing its individual manual shutoff valve during any pressure testing of the gas supply piping system at test pressures equal to or less than ½ psi (3.5 kPa).

Prepare Built-In Oven

1.Decide on the final location for the oven. Locate existing wiring to avoid drilling into or severing wiring during installation.

3.While lifting the door up, very slightly open the door by pulling it forward. Check that the latches swing down into the notches on the hinge arms.

Make Gas Connection

WARNING

Excessive Weight Hazard

Use two or more people to move and install oven. Failure to do so can result in back or other injury.

2.To avoid floor damage, set the oven onto cardboard prior to installation. Do not use handle or any portion of the front frame or trim for lifting.

3.Remove the shipping materials and tape from the oven.

4.Remove the hardware package from inside the bag containing literature.

5.Remove and set aside racks and other parts from inside the oven.

6.Move oven and cardboard close to the oven’s final location.

Remove Oven Door.

IMPORTANT: Use both hands to remove oven doors.

1.Open door to the broil stop position (about 4" to 6" [10.2 cm to 15.2 cm]).

2.Grasp sides of the door at the middle. Slowly lift door straight up.

WARNING

Explosion Hazard

Use a new CSA International approved gas supply line.

Install a shut-off valve.

Securely tighten all gas connections.

If connected to LP, have a qualified person make sure gas pressure does not exceed 14" (36 cm) water column.

Examples of a qualified person include:

licensed heating personnel,

authorized gas company personnel, and authorized service personnel.

Failure to do so can result in death, explosion, or fire.

Typical flexible connection

1.Apply pipe-joint compound made for use with LP gas to the smaller thread ends of the flexible connector adapters (see B and G in the following illustration).

2.Attach one adapter to the gas pressure regulator and the other adapter to the gas shutoff valve. Tighten both adapters.

W10526072A specifications

The Whirlpool W10526072A is an advanced refrigerator model designed to enhance the efficiency and convenience of modern kitchen spaces. With its blend of features, technologies, and characteristics, this appliance offers both functionality and style for everyday use.

One of the main features of the W10526072A is its spacious interior. With a generous capacity, it allows homeowners to store a large amount of food and beverages without compromising organization. The design incorporates adjustable shelves, which can be moved or rearranged to accommodate items of various sizes. This flexibility ensures that users can easily optimize space according to their needs.

The Whirlpool W10526072A also integrates advanced cooling technologies. One standout feature is the temperature control system, which helps maintain consistent temperatures throughout the refrigerator. This technology minimizes temperature fluctuations that can negatively impact food freshness. Moreover, it includes a humidity-controlled crisper that keeps fruits and vegetables fresh for a longer period while preventing spoilage.

Energy efficiency is another hallmark of this refrigerator model. It is designed to consume less energy compared to traditional units, contributing to lower utility bills while also being environmentally friendly. The ENERGY STAR certification highlights its commitment to energy-efficient performance, making it a suitable option for eco-conscious consumers.

Additionally, the W10526072A is equipped with a convenient ice and water dispenser, situated on the exterior door. This feature allows quick access to chilled water and ice without the need to open the refrigerator, promoting energy savings while also enhancing convenience during meal preparation.

In terms of design, the Whirlpool W10526072A boasts a sleek and modern aesthetic. The stainless-steel finish not only adds a touch of elegance to the kitchen but is also easy to clean, ensuring that the appliance maintains its appearance over time. The recessed handles provide a seamless look while maximizing space efficiency.

Overall, the Whirlpool W10526072A represents a perfect blend of functionality, style, and energy efficiency. With its spacious interior, advanced cooling technologies, and user-friendly features, this refrigerator is an ideal choice for any household seeking to elevate their kitchen experience. Whether it’s for storing groceries or providing chilled water on demand, the W10526072A is designed to meet the diverse needs of today’s consumers.