Whirlpool EF19MK manual Setting the controls, Changing the control settings, Power Saving Control

Usingyour refrigerator

POWER SAVING CONTROL TEMPERATURE CONTROL AIR OUTLET AIR CONTROL

Setting the controls...

Controls forthe refrigerator and freezer are in the refrigerator. When the refrigerator is plugged in for the first time...

T(g)gc

1. Set the TEMPERA-	2. Set the Air CON-
TURECONTROL to 3.	TROL to B.

Give the refrigerator time to cool down com- pletely before adding food. (This may take sev- eral hours.]

These settings should be about right for nor- mal household refrigerator usage.

The controls will be set about right when milk or juice is as cold as you like and when ice cream is firm.

Do not block the air outlet on the control panel. Blocking it can slow the air movement needed to keep temperatures at the level you set.

Changing the control settings...

If you need to adjust temperatures in the re- frigerator or freezer, use the settings listed in the chart below.

l

l

l

Adjust the Temperature Control first.

Wait at least 24 hours between adjustments. Then adjust the Air Control, if needed.

CONDITIONS		REASONS					RECOMMENDED SEllINGS:
If Refrigerator		Door	opened	often			Temperature	Control
Section	is	Large	amount	of food		added	Air Control		:
TOO WARM		Room	temperature		too	warm
If Freezer		Door	opened	often			Temperature	Control	4
Section	is	Large	amount	of food		added	Air Control		A
TOO WARM		Very	cold room		temperature
		(can’t	cycle	often enough)

	If Refrigerato r
QUESTIONS?	Section is
...call your	TOO COLD
COOL-LINE”	If ICE isn,t
service	MADE FASTENOUGH
assistance
telephone	If BOTH SECTIONS
number
DwW.	are TOO WARM

Controls		not		set	correctly	Temperature	Control	2
for your		conditions				Air Control		B
Heavy		ice	usage			Temperature	Control	3
Very	cold		room		temperature	Air Control		A
(can’t	cycle			often enough]
Door	opened			often		Temperature	Control	4
Large	amount			of food added		Air Control		B
Very warm or very cold
room	temperatures

Power Saving Control...

The Power Saving Control on the Control Con- sole operates electric heaters around the door openings. These heaters help keep moisture from forming on the outside of the refrigerator.

1.Use the “OFF”set- ting when humidity is low.

2.Use the “ON” setting if moisture forms on the outside of the refrigerator.