Whirlpool ED19AK, EHD192XK, EHD192VK Install Properly Remove, Labels, Clean It, Level, Plug It

Install Properly...	Remove		Sales	labels...
	Remove		the Consumer		Buy Guide	!obel and	any
	InsIde	sales	labels	before	using the	refrigerator	Re-
	move	any	left over	glue	with rubbing	alcohol

Clean It...

1.Allow 12 inch (1 3 cm] space between counters

and cabinets and the sides and top of the re- frigerator for ease of ~nstollatton

2	If the	refngerator		1sto	be against	a	wall, you	might
	want to leave enough space so the door can be
	opened		wider
3	The	refrigerator		back	can be	flush against		the
	wall
	level		Refrigerator-Freezer...
		Leveling		SKa~			1
						Use	Screwdriver

					Left	to Lower
1 Remove			base	grille	[see	page	6)
2	To	raise	front,	turn each		screw	to	the	right
3	To	lower	front,	turn	each	screw	to	the	left
4	Check		with level

Clean your refrigerator before using it See clean- ing InstructIons on page 7

Plug It In...

Z--prong

grounding type wall receptacle

Refrigerator

Power Cord

Recommended

Grounding Method

A 115Volt,60 Hz., AC only, 15or 20 ampere fused and

grounded electrlcal supply IS required It IS recom-

mended that a separate circuit serving only this

appliance be provided.

Do not use an extension cord. Use a recepta- cle which cannot be turned off with a switch or

pull chain. See individual electrlcal requirements

and grounding instruction sheet In your Ilterature package.