Changing the control
If you need to adjust temperatures in refrigerator or freezer, use the settings listed in the chart below as a guide. If you have questions, call our Consumer Assistance Center number. (See page 21.)
settings
l Adjust the Refrigerator Control first.
l Wait at least 24 hours between adjustments l Then adjust the Freezer Control if needed.
CONDITION:
If Refngerator Section is
TOO WARM
If Freezer Section is
TOO WARM
REASON:
Door opened often
Large amount of food added Room temperature too warm
Door opened often
Large amount of food added Very cold room temperature (can’t cycle often enough)
RECOMMENDED CONTROL
Refrigerator 4
FreezerA
Refrigerator
Freezer
If Refrigerator | Controls | not set correctly | Refrigerator | 2 |
Section is | for your | conditions | Freezer | B |
TOO COLD |
|
|
|
|
If ICE isn’t
MADE FAST ENOUGH
If BOTH SECTIONS
are TOO WARM
Heavy ice usage
Very cold room temperature (can’t cycle often enough)
Door opened often
Large amount of food added Very warm or very cold room temperatures
Refrigerator
Freezerz
Refrigerator 4
FreezerB
Adjusting the refrigerator shelves
Shelves can be adjusted to match the way you use your refrigerator. Glass shelves are strong enough to hold bottles, milk and other heavy food items.
To remove glass shelves:
1.Remove items from shelf.
2.Slide shelf out with an even, constant pull.
3.Lift front and slide the rest of the way out.
To move shelf guides to a new position:
1.Lift front of guide. Pull guide forward off rear support. Repeat for other guide.
2.To replace guide, push guide onto rear support. Push front of guide down onto support.
To replace glass shelves:
I. Guide rear of shelf into shelf guide. 2. Slide shelf into place.
Be careful when handling glass items.